Playboy edition Pics and info
#71
Registered
Joined: Aug 2010
Posts: 39
Likes: 0
From: OK
What props did you have on boat back then, and how did it run? It has imco boxes on now with imco lowers. Maximus 5 blades, I believe 30p.
#74
Registered
Joined: Aug 2010
Posts: 39
Likes: 0
From: OK
I ran 79-81 pretty consistent, props out. I switched them spinning in and best I saw was 83. It planes great either way and pulls good at all rpms. I plan on going to B1's after new power is in.
#76
#79
I am running Hydromotive PX5's on mine. I have Imco Lowers. I also have some B1's 4 blades. I get a better cruise speed out of the Hydro's. And that is typically where I run the boat. I spin the drives in. Which of course gives up a little bit of docking ability. My 500's are warmed up
#80
Registered

Joined: Apr 2007
Posts: 157
Likes: 7
The real Playboy's were black and silver with the wood floor. Nauti's was the real deal. Silver motors and drives from Mercury. Not sure but think there were only 3 of those. The white one with the silver boot stripe we sold to a customer in Boston and we did the Prochargers and the set up. very fast boat. Chris.




