I'll have to check out your boat on Saturday. That's when I'm headed to MDG.

Its going to be 800+ on the Dyno depending on how much boost your decide to run. It will be awesome. Keep us updated

Well if your starting from 0 I would go to a truck stop or order some alum. cleaner (acid) from Wab, and flash clean the alum, then I'd get two buffing wheels, my peterbuilt dealer has them, one yellow which I would use the red bar of jeweler polish and that's a cutting compound, use that first, after that I'd use a white wheel, with a white bar of jewel polish, and I take it one step farther I get a soft cotton wheel from eastwood and use wabs liquid polish, if you do that it will look like a mirror when it done, it is a very dirty job, you will a couple shades darker till your done, but once you get it to that point, to maintain it I just use Wabs liquid by hand it goes on very easy and comes off easy. There's tons of you tube vids on polishing aluminum check them out to know what your getting yourself in too...

Look at a product called shark hide to keep the polished look. It last for about a year and is real easy to put on. These are my lowers after one summer of use
[ATTACH=CONFIG]551927[/ATTACH]

I've got a bullet that is ready to go. It's one of my old boats.

918.232.3503

Mid 60's and the price is flexible

pictures?

^^^^^^ ditto! ^^^^^^

Is that asking mid $60k's or it runs mid 60's? I'm also interested in see some pics of your boat. Thx

I like this idea Kevin! I will own a Bullet someday for sure. Great boats and lot of fun. I would want one with decent power Imco drives and dry exhaust.