Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Chicago boys (https://www.offshoreonly.com/forums/cigarette/341631-chicago-boys.html)

PigNaPoke 12-02-2016 08:18 PM


Originally Posted by frickstyle (Post 4506270)
Actually, if you count them all up, probably #4 or #5 at this point. (If you count #1&2 initial "brand new builds")
Technically "rebuild" #3 at 15-20hrs if you are not counting my original builds.
It's getting old.....

What drives and power? My fav cig...

division1 12-04-2016 06:19 PM

Ok so 2 days of derigging and cleaning and getting ready to sand and repaint bilge, I'm working on making all the plates for under the moters and rebuilding all trim pumps and using all new hardware. Hope to have it all ready for the moters buy the 1st of the year the moters are complete drop ins plug and go so shouldn't be to bad hope to have running in Jan

vintage chromoly 12-04-2016 06:39 PM


Originally Posted by MILD THUNDER (Post 4506294)
Might be time to find a new builder . Thats no good.

Been saying this for over 2 years! His builder is Dean G. :party-smiley-004:

frickstyle 12-05-2016 06:58 AM

2 Attachment(s)

Originally Posted by PigNaPoke (Post 4506342)
What drives and power? My fav cig...

Thanks. Engines are Gellner, 572 cube w/ 14-71s drives are no.5s on boxes.

May be a run of bad luck, but there were some mistakes made along the way. Just letting Dean make it right, too late to start with another builder, plus probably double the repair bill at this point if I went elsewhere. Out of respect for Dean's business, I am trying to remain civil about the whole situation. At the end of the day, I just want the boat to run.

Trust me, I am beyond frustrated. (Not trying to highjack your thread, sweet boat btw).

[ATTACH=CONFIG]562440[/ATTACH]

[ATTACH=CONFIG]562441[/ATTACH]

mmb 12-05-2016 07:42 AM

The frustration of rebuiling yet again would long be forgotten spending 5-7k with another builder to have them built right and be done with this insanity...

frickstyle 12-05-2016 07:59 AM

I appreciate your constructive feedback, your point is painfully obvious. Giving the man a chance to make it right, that is all.....

PigNaPoke 12-05-2016 09:24 AM

I had the same teething pains with a builder as well. I was fuel injected however (way more complex for the average guy IMO) few shy of the magic 1000 mark.

I had to have a conversation with him about my expectations and the fact I was paying the high coin for an outcome. NOT an experiment. (ENGINE had less than an hour. First time in boost failure.)

Drove up and took it apart with him.

We agreed on only parts cost for the next round (labor was on him) took the boat to young performance marine and let Eddie tune it... (best $ I've dropped in the hobby period).

Boat is gone, but last report was 175 hours trouble free boating. Moral is... it can work out if he is diligent and interested in making you satisfied.

frickstyle 12-05-2016 09:53 AM

^^^Yep, it can happen. After all these things are mechanical.

division1 12-10-2016 06:17 PM

Is it boating season yet ?!?! I hate the cold

TracyRR 12-10-2016 09:39 PM

Damn, the boat looked nice in the pic above!!


All times are GMT -5. The time now is 12:36 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.