|
Originally Posted by scippy
(Post 4613533)
Are you sitting back or hands on?.......either way, deep pockets...or deep deep pockets!!
Not really deep pockets. I am mostly hands off but i have helped a bit with different stuff when I can. Also traded on some labor and favors. Spent today grinding and laying glass in all the places that were just filled in with resin and filler. On the downhill now but still a ton to do. |
|
Was the hull & deck glassed together before you owned it or did you recently do this?.....looks like new glass, but either way good move.
|
I was done before i bought it.
|
Originally Posted by scippy
(Post 4613776)
Was the hull & deck glassed together before you owned it or did you recently do this?.....looks like new glass, but either way good move.
|
Some more pictures....new dash coming soon.https://cimg0.ibsrv.net/gimg/www.off...c6c0698c5c.jpg
Ohhh [email protected] we go .... https://cimg2.ibsrv.net/gimg/www.off...370ef6b524.jpg New cabin door that was the start of the new dash. https://cimg3.ibsrv.net/gimg/www.off...bbb501405c.jpg Start of the mock up https://cimg0.ibsrv.net/gimg/www.off...17a2cf7bb7.jpg |
|
geeze tore chit up!!
|
o.k., so you mocked it up real nice w/ ply.
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together to make the mold. that's a good idea. will you use any filler to round out the inside / outside corners on the part side ? ever use the same materials prior to this job for a mold ? how did it turn out ? how about releasing it ? are you making the cockpit side walls the same way ? go into some detail, i 'm all ears |
Originally Posted by outonsafari
(Post 4616241)
o.k., so you mocked it up real nice w/ ply.
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together to make the mold. that's a good idea. will you use any filler to round out the inside / outside corners on the part side ? ever use the same materials prior to this job for a mold ? how did it turn out ? how about releasing it ? are you making the cockpit side walls the same way ? go into some detail, i 'm all ears |
| All times are GMT -5. The time now is 05:42 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.