|
Originally Posted by Ironmanwb
(Post 4662553)
if this turns out as nice as yours I will be extremely happy. I'm Really struggling with what to do about the drives though. I want to buy the boxes that hace been offered to me but I don't know if they will put me at the height I want. Motors can't go up anymore so I have to adjust with the drives. Also so I only put 4 hrs on the boat after I bought it so I have almost zero seat time in it which was also 3 years ago. |
He's running the same drives #3 but he is 2" or so higher. He doesn't have headers or tailpieces. Even he would like to be up another inch or so. |
Originally Posted by Team Archer
(Post 4662510)
I have a number 3,4,5 jig that I loan out. If you are interested give me a call Regards Dan 949-646-9778
|
Originally Posted by Ironmanwb
(Post 4662607)
He's running the same drives #3 but he is 2" or so higher. He doesn't have headers or tailpieces. Even he would like to be up another inch or so. |
Originally Posted by frickstyle
(Post 4662619)
....tractor pipes thru the hatch..... problem solved!
I'll probably just run what i have and look for 5s on boxes once I get the bank account refilled. |
^^^That's probably a good plan. Will advise if I decide to move to arnesons and I can sell you my entire setup.
I would hope, however, my boat would be gone/sold before I ever reach that point. |
Justin you can stop by any time its seems I am always here any way They never let me leave :). Regards Dan
|
Ironman you are gong to want to make sure that you core plug all of your mounting holes in the transom when you use Coosa board because it will crush under the load of the drives and tabs. We use garlite that we get from McMaster Carr. If you have any questions feel free too call Regards Dan
|
Originally Posted by Team Archer
(Post 4662683)
Ironman you are gong to want to make sure that you core plug all of your mounting holes in the transom when you use Coosa board because it will crush under the load of the drives and tabs. We use garlite that we get from McMaster Carr. If you have any questions feel free too call Regards Dan
|
| All times are GMT -5. The time now is 06:03 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.