|
How did you do to get them to cut it to fit your boat? How much did it cost? |
Bruce Jones is doing the restoration. He ordered and cut it. He usually makes a template before he cuts any pieces for the boat due to their odd shapes.
Not sure on price but I think he said about 250 per sheet. |
http://www.coosacomposites.com
|
Looking great!
|
For anyone following this I posted in a couple other places but I need the transom drill jig for the SSM3 drives so we can re cut the transom. I will buy or rent however anyone want to do it.
|
Originally Posted by Ironmanwb
(Post 4654383)
Not fun at all . I hope your project goes better than mine.
Today was the first time Bruce has actually *****ed about the boat. He said taking the tank out was completely miserable. We are hoping the duel fill idea will actually work . We are also trying to decide whether to transfer fuel from the front tank to the back or have the engines pull from either tank. |
We are going to run a transfer pump from the bow tank to the main tank. Engines will only pull from main tank. We have a couple unused fittings on the main tank that we can dump fuel into. The only real thing that can be a problem is pumping too much fuel into the tank and having it blow out the vent.
|
unbelievable how a transom can look so bad when under restoration, and turn out so nice after! just need some finishing touches ! Keep it up it is coming along well !
|
Originally Posted by jeff32
(Post 4662421)
unbelievable how a transom can look so bad when under restoration, and turn out so nice after! just need some finishing touches ! Keep it up it is coming along well !
|
| All times are GMT -5. The time now is 01:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.