Lock & Load. LOTO Cig rondevous ready, well it was.
05-20-2017 | 07:57 PM
#31
Gold Member
Joined: Sep 2003
Posts: 154
Likes: 1
From: Crystal River, Florida
All in all, it was a good day. We were disappointed in the work from the "car painters". So, ZP DECIDED we needed to repaint the transom assemblies. In a couple of hours we resanded and he "did it right".
NEVER argue with the Dr.
NEVER argue with the Dr.
05-22-2017 | 12:15 PM
#32
Thread Starter
Gold Member
Joined: Feb 2001
Posts: 1,596
Likes: 12
From: Crystal River Fl,USA
Going back together now. New gimbal ring arrives today. Wow the collector block on the front of a 6 for steering and trim is a pain the ass to connect inside an extension box.
05-23-2017 | 09:59 AM
#33
Thread Starter
Gold Member
Joined: Feb 2001
Posts: 1,596
Likes: 12
From: Crystal River Fl,USA
Port done, waiting on a 1"-16 die for the upper pin to finish starboard. Also changing from 1.61 gears to 1.5 ratio. He thinks he has the horses to spin em a little faster 
Last edited by Zero Patience; 05-23-2017 at 10:32 AM.
05-24-2017 | 08:07 PM
#34
Thread Starter
Gold Member
Joined: Feb 2001
Posts: 1,596
Likes: 12
From: Crystal River Fl,USA
Well Lock & Load is ready to go the Cig Rondevous now, everything in the drive end rebuilt, repainted, new gimbal ring, switched to 1.5 gears, and re filled with merc gold Drive oil. We will have both boats there. 18 days away for us as we will get there early to enjoy the big lake a little longer. Everyone drive/tow safe, look forward to seeing everyone again
06-12-2017 | 10:46 PM
#36
Registered
Joined: Aug 2001
Posts: 14,571
Likes: 4,541
From: Channel Islands, So. Cal.
06-13-2017 | 03:55 PM
#39
Drive to arrive alive!!!
Joined: Apr 2002
Posts: 4,087
Likes: 479
From: OK and LoTO
