Screws for the bow rail on a top gun?
#2
Registered
Not to sound like a smart ass but why not remove another go to local store to see if you can source it. I did that recent on engine hatch hardware. Couldn't find exact length. Ended up cutting it, dressing it, and it was perfect.
#3
VIP Member
VIP Member
or call phil or check his site. he is THE best option for sourcing cig original parts including nuts and bolts.
#4
Registered
#5
Platinum Member
Platinum Member
iTrader: (6)
Phil knows Cig's
#9
Registered
Pull one out, measure it, order from McMaster Carr.
Sure, you'll get qty 10 or 20 when all you need is one, but you'll probably need more in the future. Buy a tackle box with adjustable trays and throw all your extra fasteners in there. One day, you'll be happy you did. And buy good stainless grades, so you only have to do it once.
Oh yeah, and don't use a battery powered driver to put it back in, unless you feel like driving the bit through the fiberglass when it slips out of the phillips head....
Sure, you'll get qty 10 or 20 when all you need is one, but you'll probably need more in the future. Buy a tackle box with adjustable trays and throw all your extra fasteners in there. One day, you'll be happy you did. And buy good stainless grades, so you only have to do it once.
Oh yeah, and don't use a battery powered driver to put it back in, unless you feel like driving the bit through the fiberglass when it slips out of the phillips head....
#10
Platinum Member
Platinum Member
iTrader: (6)
Don't forget the 25$ shipping....agree McMaster Car ^^^