Top Gun Hatch Seals

Reply Subscribe

Thread Tools

02-28-2018 | 08:58 PM

#11

1MOSES1

Registered

Joined: Jun 2010

Posts: 4,806

Likes: 891

I missed the whole deck hatch part...

One thing i will say about the engine hatch, we didn’t use the 1/2” d-moulding. We used the 1”. It came out better.

03-01-2018 | 07:00 AM

#12

HOSSMAN

Thread Starter

Registered

Joined: Sep 2002

Posts: 764

Likes: 238

From: Boerne, TX.

Quote:

Originally Posted by Jim Diesel

Here is the measurements of the seal, same size as Lip-Ship sales.

Thanks a million Jim! Appreciate you doing that for me. The boat is an hour from us so you just saved me a ton of time. You doing Tickfaw this year? If so see ya there!

03-01-2018 | 11:13 AM

#13

Jim Diesel

"Unregistered Gun"

Joined: Dec 2005

Posts: 1,423

Likes: 225

From: Paducah, Ky

Quote:

Originally Posted by HOSSMAN

Thanks a million Jim! Appreciate you doing that for me. The boat is an hour from us so you just saved me a ton of time. You doing Tickfaw this year? If so see ya there!

No Problem, thats the same size for the cabin door as well! We had planned on it but a few things have changed so not this year, we are doing Cig Rendezvous, Old Hickory, and a local run here on KY and Barkley Lake. The maybe list is Lake Cumberland or a long shot of Emerald Coast.