87 Top gun AC install ???
#1
Thread Starter
Gold Member

Joined: Oct 2005
Posts: 11,688
Likes: 216
From: Olmsted Falls,Ohio Marblehead,Oh
About to put the A/C into the Top Gun, in the mistress it was under V berth but for sure takes a beating up there, broke a tube once, trying to see what guys may have done in the Top gun with the 87-90 Cabin layout... pics help...
I may still put in V berth area to make ducting easier and make sure things are supported the best I can.... but figured maybe others had better ideas..??
I may still put in V berth area to make ducting easier and make sure things are supported the best I can.... but figured maybe others had better ideas..??
#4
Registered

Joined: Nov 2007
Posts: 4,029
Likes: 510
From: Cleveland, Ohio
#8
Registered

Joined: Jun 2009
Posts: 9,967
Likes: 6,456
From: Chicago
I`ve busted a line twice. Once in LOTO and it was a 105* with 200% humidity. Good thing we had a condo.
I forget what your set up is , you have the 2 chairs right? I have room in the front port side but thats where the fridge went. The fridge has never had any issues there.
I forget what your set up is , you have the 2 chairs right? I have room in the front port side but thats where the fridge went. The fridge has never had any issues there.
#9
Thread Starter
Gold Member

Joined: Oct 2005
Posts: 11,688
Likes: 216
From: Olmsted Falls,Ohio Marblehead,Oh



I don’t have that spot, v berth or head is only option and I can’t lose the head, gonna go in berth and plan to run the ducting to the fans and disperse from there, my new adventure is the return air, hoping there is a void between bulkhead and liner mike the mistress had...
#10
Registered

Joined: Jun 2009
Posts: 9,967
Likes: 6,456
From: Chicago
My supply is below your speaker speaker is and directly on the other side in the bulkhead . My return is opposite in the bulkhead and straight back near the floor
Last edited by ICDEDPPL; 04-11-2018 at 12:15 AM.


