Have 2000 20 footer which has the 3 seats up front (like a bench seat). The bottom tends to move ever so slightly, as there is no support on the underside, its just mounted to the sides of the cockpit. Hope I explained this clearly. Any of you guys with newer 20's run into this problem and what was the solution?

Bringing to the top. Any ideas on what I can do?

Bucket seats,,,,,

Kinda like a bucket bench, if that makes sense.

Best pic I have at the moment.

if its flexing in the middle down, just put a brace under the middle seat to the floor..

Yea, thats what I was figuring. But more so asking, in detail, what others have done. I don't want put in some POS brace, just for the sake of putting in a brace. Something that might actually look like it belongs there.

I would call Phil at lipship
he has worked on many and his brother runs one

Without knowing what the floor looks like and if there are any access ports, I would go with 2 aluminum supports - one under each of the center bolster arm rests.

Lip-Ship is a great option.

Being in New Jersey you can try Al's Custom Auto Interiors. He does a lot of Outerlimits and custom renovations. I'm sure he would have a guy who could fabricate up a couple of nice aluminum supports.

Or try Marine Unlimited 732-255-6154. Talk to Mike or Bernie. They did a great job installing a set of bolster seats on my friends Donzi cc and definitely could help you come up with a solution.