Ironmanwb

Can you send what you bought? I would love to do the exact same thing.

Also I figured out that I have to buy all new gauges.... I am changing out a couple and Livorsi doesn't make the same rings anymore so the new won't match the old ones.

division1

Ye so the all the stainless boats and nuts I put those bins together myself with all the types and sizes I have used in the past. Each bin I have 500-700 in each bin but sure beats running to the store every day. The clamps are yea made stainless kits 1/4 up to 2 inch I ordered 4 of them that should be enough to do the hole boat I think. I will go back and look what the part number is for them.

F-2 Speedy

iTrader: (6)

Hey division your avatar got cocked.............

division1

Hahaha you noticed you guys pay attention !!!!

division1

Changed the picture that took 2.5 sec for someone to notice lol

IGetWet

Really hope she never finds what she’s looking for

division1

Those transmissions dip sticks need checked every time out !!!!

Helmwurst

Those hardware kits are NICE! I have been running back and forth to places for 3 months now trying to piece together all the needed parts to put everything back, I still am not done.

division1

Lol yea i decided I was done doing that I spent slot of time putting those together so I don’t have to do that lol nothing worse then being in the middle of so thing and having to leave it so get get screws lol I did the same thing with electric connections and I keep bud bars and stuff to just easier!!

ICDEDPPL

iTrader: (1)

I have bins with 10 years worth of screws, bolts, washers , etc etc and still don`t have everything I need. Never fails on a weekend I get ****ed by one screw or washer i don`t have.
Lucky for me McMster Carr isn`t too far and they deliver next day.. they pretty much got everything even ARP bolts , cheaper that my engine builder could order.
Intake bolts for example.. marked ARP
https://www.mcmaster.com/catalog/129/3547/96242A738