|
Seems to be very common I’m completely redoing it and making that one big bulk head that ties into the sides and goes around the cabin door. Know that the liner is out
|
Originally Posted by division1
(Post 4754147)
https://cimg7.ibsrv.net/gimg/www.off...07112fce5.jpeg
This is that piece of wood that they used as a half bulk head they glasses to the side with tabbing and then it runs behind the dash area and in my boat was never attached to anything so it was sandwiched between the liner and the dash. I had small spider crackes on the outside due to that hitting the side wall. If your dash area rattles check that area !!! |
Broke clean that pic is how I found it I have seen a few this was
|
It did look good!!! We had already updated interior when we bought it never really planned on ever getting this far into it but it just kept snowballing.
|
How do you guys feel about bilge colors I was always set on white but the shark gray is kinda appealing ? Any thoughts kinda was kicking around the idea. I’m reAlly thinking sides are going to be dark silver and the deck like a merc blue. Engines are going to be blacked out.
|
White shows dirty so easy, that's why I love my red, but red won't be right in yours, I would smooth it and paint the same silver as boat, would be so nice haha
|
Originally Posted by division1
(Post 4754147)
https://cimg7.ibsrv.net/gimg/www.off...07112fce5.jpeg
This is that piece of wood that they used as a half bulk head they glasses to the side with tabbing and then it runs behind the dash area and in my boat was never attached to anything so it was sandwiched between the liner and the dash. I had small spider crackes on the outside due to that hitting the side wall. If your dash area rattles check that area !!! |
Originally Posted by Helmwurst
(Post 4754266)
Did you cut that tabbing, or did it break clean like that?
|
Seems to be a very common issue. They way it is put together really isn’t the best. With everything removed I’m making that a bulk head that goes from side to side and will run all the way up. That will really help stiffen up the dash area a lot of the ones I have seen that break loose the end up hiring the side when the boat it flexing and end up putting a impact load spider crack on the outside. I had that as well and ground it all down and glassed it up then regeled
|
https://cimg5.ibsrv.net/gimg/www.off...d8bcdb7d8.jpeg
Ground down area with small hair line cracks put one layer of 1.5 material https://cimg0.ibsrv.net/gimg/www.off...22b8e8bc6.jpeg Structure faring compound https://cimg5.ibsrv.net/gimg/www.off...c27503fa7.jpeg Other side https://cimg5.ibsrv.net/gimg/www.off...86291216f.jpeg After glass https://cimg0.ibsrv.net/gimg/www.off...0c79593e96.png Gel coat application https://cimg9.ibsrv.net/gimg/www.off...e89a157849.png |
| All times are GMT -5. The time now is 11:32 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.