Cigarette Topgun
#892
Registered
Thread Starter
I sure did….. lots of meetings with the painter lots of color charts lots of test panels but we finally found the perfect solution. You will see soon enough!!!!!!! Can wait to start rigging. Had a small moter set back turns out you can’t run distributors on 10-71 with a normal intake didn’t find out till they were all together. Sold my intercoolers already so that was fun but got it figured out. Ended up going with a new pair of blower shop 871s there all together and waiting for bilge to dry
The following users liked this post:
thisistank (08-13-2022)
The following 6 users liked this post by division1:
AllDodge (08-13-2022), Got Cigs (08-26-2022), IGetWet (08-13-2022), kreed (08-16-2022), offshoredrillin (08-13-2022), speicher lane (08-13-2022)
#895
Registered
Thread Starter
Yes the hatch is the twin step 575 hatch didn’t want to cut and put scoops interior is all done didn’t want to modify it . Not spinning blowers to hard moters are 509s with good cams and with 8-71s low boost should make 700-750. Plenty of power lol
The following 2 users liked this post by division1:
kjm5125 (08-14-2022), thisistank (08-14-2022)
#899
Registered
Thread Starter
Glasses up the last few holes and bow light 💡
Geled ready to be blocked
Any one have experience with Simrad ? I know garmen is supposed to be the best but local store has really good deal on this one all touch screen and prettty cheap
The following 4 users liked this post by division1: