|
Playboy gets a face lift
What started out as just doing dash panels..... turned into, "Well, I might as well do this now...." Pulled motors, repainted bilge, re-rigged with all new loop clamps, repainted transom, have CMI making me a new set of thru hull tails, installed new ITS's, etc, etc..... going to have everything above rub rail repainted, and some touch ups on hull sides, and then replace interior.
|
|
|
|
|
|
|
|
Awesome!!!
"Well I've come this far, might as well........" Should be the tag line of OSO |
So true! LOL
|
Looks awesome man!!! ITS looks so much better on the back.
|
Looks nice, ITS is so much cleaner, tho bleeding it can be a PITA if not done right believe me I know..........
|
BAD AZZ Curt!
Right into the museum when you're done! :grinser010: |
Nice. What bilge paint did you use? Looks like gelcoat it came out so well. Of course now the problem is your going to want to keep it clean.
|
I sanded everything with, I believe 80 grit. Didn't go to bare glass, but cleaned/ruffed it all up. Then used oil based rustoleum, gloss white, and a Napa hardner... 1gal paint, 1qt of hardner. Applied with a brush and small roller. Lays on really thick too. I'm gonna have sea dek put in, between the stringers and on the front step.
|
Originally Posted by F-2 Speedy
(Post 4842892)
Looks nice, ITS is so much cleaner, tho bleeding it can be a PITA if not done right believe me I know..........
|
Originally Posted by Got Cigs
(Post 4842920)
Did you install ITS's from the standard bravo assemblies? I gotta figure out how to route and plumb the power steering and trim lines now.
|
Originally Posted by Got Cigs
(Post 4842920)
Did you install ITS's from the standard bravo assemblies? I gotta figure out how to route and plumb the power steering and trim lines now.
https://cimg1.ibsrv.net/gimg/www.off...66b6406098.jpg |
Havnt you been working on this for a while, lol.. it looks good Curt, getrdone
|
Originally Posted by offshoredrillin
(Post 4842944)
its easy, still the 500efi?.. the only thing you need is the harden marine reservoir . I was having issues on my 20, i put the new reservoir on, ran the pump to it. tuned from lock to lock 3 times and system was bled. i salvaged the one from my 20, and it still works but has some corrosion on it. keep the bilge floor as smooth as possible, and even use a thick ceramic on it so if oil or anything leaks it will slide right off.
https://cimg1.ibsrv.net/gimg/www.off...66b6406098.jpg |
Originally Posted by F-2 Speedy
(Post 4842922)
No mine was already done, but when I put the new engines in air was a beach to get out of the system, if you need some pics let me know
|
Originally Posted by Got Cigs
(Post 4842977)
Yes, still 500 efi's. Sounds good to me thanks. Bling and makes bleeding easier.... win win right there!
|
Looks amazing
|
https://cimg0.ibsrv.net/gimg/www.off...bd2a93fdff.jpg
https://cimg4.ibsrv.net/gimg/www.off...aae7b8d5d3.jpg Got bolsters and side panels out. |
Tossing around the idea of having the stitching done in red, when I redo interior. What you guys think? Going keep the same light grey color.
|
Have ten 6.5" kicker speakers. Any idea what they might be worth?
Found a local gel coat guy, thats been around a while. So, instead of painting everything above the rub rail, this guy can fix the cracks and bring everything back like new. Will still be replacing rub rail tho. |
Originally Posted by Got Cigs
(Post 4845042)
Tossing around the idea of having the stitching done in red, when I redo interior. What you guys think? Going keep the same light grey color.
Perfect, scarlet and gray..... |
Originally Posted by Got Cigs
(Post 4845041)
https://cimg0.ibsrv.net/gimg/www.off...bd2a93fdff.jpg
https://cimg4.ibsrv.net/gimg/www.off...aae7b8d5d3.jpg Got bolsters and side panels out. |
Originally Posted by bigboat28
(Post 4845312)
How did the side panels come out? Just pull??
|
Originally Posted by bigboat28
(Post 4845311)
Perfect, scarlet and gray.....
|
Originally Posted by 1MOSES1
(Post 4845313)
yes held in by plastic trees…similar to door panels on a car
|
Originally Posted by jbraun2828
(Post 4845319)
go blue!
That would look good, but I don't have any blue on the boat. LOL |
My old boat
|
Originally Posted by dreamer
(Post 4845800)
My old boat
looking good Curt, The Erie Islands are calling |
https://cimg2.ibsrv.net/gimg/www.off...2d018f108d.jpg
https://cimg8.ibsrv.net/gimg/www.off...7a446b6e18.jpg New interior coming along |
Outstanding!!!!
|
|
https://cimg6.ibsrv.net/gimg/www.off...1cee3e9cb8.jpg
https://cimg8.ibsrv.net/gimg/www.off...55eab6c638.jpg https://cimg9.ibsrv.net/gimg/www.off...8df5072c60.jpg Cracks in gel on deck filled, sprayed, wet sanded and buffed |
https://cimg2.ibsrv.net/gimg/www.off...0a5fcf8c14.jpg
Trim tab rams polised |
| All times are GMT -5. The time now is 10:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.