Operation 87 Cafe rescue
03-04-2023, 05:27 PM
#42
Platinum Member
Platinum Member
iTrader: (6)
You running on Pickwick ?
03-04-2023, 06:35 PM
#44
Platinum Member
Platinum Member
iTrader: (6)
I have family in your town my uncle was an Aeronautical Engineer and worked on several NASA projects, I learned to water ski on Pickwick when visiting my grandparents cabin, good times
The following users liked this post:
87CigCafe (03-04-2023)
03-04-2023, 06:38 PM
#45
Registered
Thread Starter
Really?
no kidding? my hometown is Tullahoma born and raised and just live on the outskirts of it now. Did your uncle happen to work at AEDC Arnold Air Force base by chance?
03-04-2023, 06:50 PM
#46
Platinum Member
Platinum Member
iTrader: (6)
that sound familiar but Im not for sure to many years ago, his name was Richard Rhudy
The following users liked this post:
87CigCafe (03-04-2023)
The following users liked this post:
Bfoodman (03-21-2023)
03-21-2023, 12:16 PM
#48
Registered
87 Cig. I was wondering if you could do me a favor and measure the length from the stern rub rail to the center of the front windscreen. I am having a new cockpit cover made and the trim shop accidentally through out my original. The boat is in a storage barn but with being busy I can't get up there and measure it. Any help would be appreciated.
03-21-2023, 12:19 PM
#49
Registered
Thread Starter
Yes
87 Cig. I was wondering if you could do me a favor and measure the length from the stern rub rail to the center of the front windscreen. I am having a new cockpit cover made and the trim shop accidentally through out my original. The boat is in a storage barn but with being busy I can't get up there and measure it. Any help would be appreciated.
