1986 38 Flatdeck
09-27-2022, 07:37 PM
#1
Registered
Thread Starter
1986 38 Flatdeck
Finally got to join the Cigarette family!!! Boat came with the leather binder from cigarette with everything still in it!
Now I start the upgrading and personalization.
Swapped over from Fountain and so far I am happy!!!!!
Now I start the upgrading and personalization.
Swapped over from Fountain and so far I am happy!!!!!
The following 10 users liked this post by ScottyChatham:
1983ScarabIII (04-23-2023), glassdave (03-03-2024), H20 Toie (09-27-2022), Helmwurst (09-28-2022), ICDEDPPL (09-28-2022), larslindroth (10-01-2022), miller high life (10-07-2022), scippy (09-27-2022), steeb (10-14-2022), ttuton (09-27-2022)
09-27-2022, 08:31 PM
#2
Platinum Member
Platinum Member
iTrader: (6)
original paper work is cool, like a # matching muscle car, so whats the details, engines, drives..........didn't you just look at an 36 Apache ?
The following users liked this post:
cheech (09-28-2022)
09-27-2022, 08:56 PM
#3
Registered
Thread Starter
Very mild power/drives right now.
470 Merlin block, dart headed and TRS drives. We will do the interior and stereo system then decide on power/drives. Boat looks great and runs great, so we are going to use it as we customize in steps lol.
The following users liked this post:
larslindroth (10-01-2022)
09-28-2022, 04:58 AM
#5
Registered
Thread Starter
The following users liked this post:
jeff32 (09-28-2022)
Charter Member
10-07-2022, 11:32 AM
#7
Gold Member
Gold Member
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
The boat was local to me two years ago overall it's in very good condition needs a couple small things but nothing major great running reliable boat!!!
10-07-2022, 11:36 AM
#8
Registered
Thread Starter
Boat actually needs transom and stringer work. I have it scheduled to be done End of November. We are enjoying until then. I was aware of issues when I bought it and wanted a winter project.
10-07-2022, 03:11 PM
#10
Registered
Thread Starter
I am planning on replacing the whole transom and stringers up to the bulkhead as of now. Everything else checked solid. We got the motors straightened out and running like a top. The guy I actually bought from didnt know anything, I showed him all the issues Cory told me about. Overall its a nice boat. I am also going to update the interior, cabin and sound system. Going to use the boat for my dingy for our Carver lol.
