Off To California.
#12
Congrats Dan! No looking back brother. Only looking forward. Always loved the 3600’s. I was seriously considering one myself before we bought the gun. They’re fantastic boats. Can’t wait to see what you get. I’ll look for your cig out this way.
#13
Haven`t seen it in person yet but it looks super clean !
https://www.youtube.com/watch?v=YHkj...SunsetBoatSale
Tall Deck 572ci * The heads are Dart Pro-1 that are ported
* The ignition controller is a MEFI 4 with Daytona sensor controller and coil.
* Isky solid roller cam with T&D shaft. 1.7:1 rockers
* Positions are JE
* Block is a Dart tall deck
* Rods are Carillo
* Crank is Lunati with an extra key-way cut by Lunati for the blower configuration.
https://www.youtube.com/watch?v=YHkj...SunsetBoatSale
Tall Deck 572ci * The heads are Dart Pro-1 that are ported
* The ignition controller is a MEFI 4 with Daytona sensor controller and coil.
* Isky solid roller cam with T&D shaft. 1.7:1 rockers
* Positions are JE
* Block is a Dart tall deck
* Rods are Carillo
* Crank is Lunati with an extra key-way cut by Lunati for the blower configuration.
you mentionned you did not feel like taking an engine out of your cig again, I thought this meant you were looking for OB
but i was wrong! NICE inboards right there!
how much will cost the insurance on the 36? I too been looking at these for years...
#15
Registered
Joined: Jun 2022
Posts: 641
Likes: 445
From: Tullahoma Tennessee
#19
Registered

Joined: Jun 2007
Posts: 7,309
Likes: 1,815
From: Merritt Island, FL
Nice I have always liked those cats. They are big for the length, first time I seen a 40 I thought holly chit!
Haven`t seen it in person yet but it looks super clean !
https://www.youtube.com/watch?v=YHkj...SunsetBoatSale
Tall Deck 572ci * The heads are Dart Pro-1 that are ported
* The ignition controller is a MEFI 4 with Daytona sensor controller and coil.
* Isky solid roller cam with T&D shaft. 1.7:1 rockers
* Positions are JE
* Block is a Dart tall deck
* Rods are Carillo
* Crank is Lunati with an extra key-way cut by Lunati for the blower configuration.
https://www.youtube.com/watch?v=YHkj...SunsetBoatSale
Tall Deck 572ci * The heads are Dart Pro-1 that are ported
* The ignition controller is a MEFI 4 with Daytona sensor controller and coil.
* Isky solid roller cam with T&D shaft. 1.7:1 rockers
* Positions are JE
* Block is a Dart tall deck
* Rods are Carillo
* Crank is Lunati with an extra key-way cut by Lunati for the blower configuration.






Nortech looks fantastic but man it would be hard to let the cig go......she was so perfect!!
