Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Cafe Racer Deck Hatch issues (https://www.offshoreonly.com/forums/cigarette/383245-cafe-racer-deck-hatch-issues.html)

87CigCafe 07-29-2024 06:13 PM

Cafe Racer Deck Hatch issues
 
What have you guys done to prevent leaks? First time mine has seen rain since I’ve owned it this past weekend and noticed it coming in through the hatches. Seen on lip ship they have seals but are they for the Cafes? My seals SEEM to be ok but I wouldn’t be surprised if they are the original ones and are just worn and flat from time.
https://cimg7.ibsrv.net/gimg/www.off...82026fc7b.jpeg

seafordguy 07-29-2024 07:39 PM

Replace seals with lip ship OEM.

make sure you get them placed so they seal properly.

make sure your drain holes are clean so water doesn’t puddle up.

87CigCafe 07-29-2024 07:59 PM

?
 

Originally Posted by seafordguy (Post 4904401)
Replace seals with lip ship OEM.

make sure you get them placed so they seal properly.

make sure your drain holes are clean so water doesn’t puddle up.

drain holes you speak of haven’t spotted those? Inside hatch rail?

TICafeRacer 07-31-2024 02:25 PM

Holes in the deck go into the back of the hatches
 
https://cimg9.ibsrv.net/gimg/www.off...b552671e3.jpeg
Hopefully this shows the holes properly

87CigCafe 07-31-2024 08:36 PM

Awesome!
 

Originally Posted by TICafeRacer (Post 4904628)
https://cimg9.ibsrv.net/gimg/www.off...b552671e3.jpeg
Hopefully this shows the holes properly

actually makes sense now! Mine looks to have been covered up by something at some time.

where do they drain to?

thanks!

TICafeRacer 08-01-2024 06:21 AM

The backside of the inside of the hatch by where the strut connects. I will try to take a picture today and show it.

87CigCafe 08-01-2024 07:21 AM

Thanks!
 

Originally Posted by TICafeRacer (Post 4904672)
The backside of the inside of the hatch by where the strut connects. I will try to take a picture today and show it.


man I sure appreciate it!!

TICafeRacer 08-01-2024 08:46 AM

Second attempt
 
Here it is. I tried once and something went wrong. It is the hole under the screw on the right.

https://cimg7.ibsrv.net/gimg/www.off...d972a5059.jpeg

seafordguy 08-02-2024 12:02 PM

I think they are molded so you may be able to blow them out with compressed air……

Tartilla 08-02-2024 12:13 PM

Looks like a raised fiberglass rim covered completely by the hatch? The only way they would leak is if the drain was plugged and the captured water is sloshing when running getting past the seals, or totally full and weeping past bad seals?

seafordguy 08-02-2024 03:32 PM

The key is the seals. Once I put new ones on I never opened mine again. They tend to shrink inward and start leaking…..


All times are GMT -5. The time now is 08:15 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.