Factory Floor-‘04 TG
 

My ‘04 Gun has the ‘cheese grater’ floor in it. I’ve been avoiding on dealing with it and have just been going the carpet route. Was thinking on finally doing Sea Deck. How do I remove the original floor? I’m imagine using heat of some kind and a lot of frustration. Thanks in advance.

Go with Maine Mat they use snaps instead of glueing it down,you can go over the old floor without removing the old floor.

My seadeck it just on top of the cheese grator

Interesting. You can’t feel it thru the Sea Deck? And Sea Deck sticks to it? Thanks

I would recommend the snap in route as well. The glued on stuff does eventually peel and shrink. It also gets dirty and worn if you don’t stay on top of it. AND from what I understand getting the glue off when you swap
out is a NIIIIIGHTMARE. We did Seadeck in the cafe and im
getting ready to do it in the gun but it’ll be the snap in. Or we may do carpet again. We’ll see.

whats the cheese grator........:party-smiley-004:

I just put Marine Mat right over my cheese grater (feet grader).

I have snaps on my foot rests, but I just laid the rest of the carpet in. Makes it really easy tp pull out and clean with simple green. I’ll dig out a pic.

https://cimg7.ibsrv.net/gimg/www.off...2cdba6a568.png
https://cimg7.ibsrv.net/gimg/www.off...28255811c.jpeg

those are fresh out of the shipping tube, they obviously lay flat once the sit of a bit

who’d you order through? Can I just call your guy and say send me a set in grey and red?! 😁

The pirelli floor

https://cimg3.ibsrv.net/gimg/www.off...173e98c8e.jpeg

Whoever thought those pirelli floors were a good idea 🤦🏻‍♂️

when I was shopping carpets these guys were high on my list.

https://bockrugworks.com

https://cimg5.ibsrv.net/gimg/www.off...746292fb0.jpeg
https://cimg4.ibsrv.net/gimg/www.off...f9441acc8.jpeg
https://cimg6.ibsrv.net/gimg/www.off...6dd01e513.jpeg

Seafordguy is that Sea Deck?
https://cimg4.ibsrv.net/gimg/www.off...31f006509.jpeg
https://cimg5.ibsrv.net/gimg/www.off...628ad788e.jpeg

Maximus,

Kinda curious on this, too. Our PQ has a fairly fine diamond pattern on the floor, but we've never found it to be too aggressive for bare feet. Just curious....

Thanks. Brad.

H20 already responded. It’s the pirelli floor found in a lot of 2004-2015 ish…cigarettes

Do the new Cigs come with carpet or seadek?

1Moses1,

Ah. Missed that. So it’s an installed flooring, not molded in?

Thanks. Brad.

Tony Schlabach did mine.

we spent a lot of time getting the dimensions right. Quarter inch here, quarter inch there. As you know, not mass produced so we templated my specific boat to get it close.

mine is Marine Mat.

I think I have that stuff in my boat, I was told you couldn't do seadek over the top cuz it would show the pattern through

I like to use the thicker triple layers (9mm) .
It`s softer.

https://cimg9.ibsrv.net/gimg/www.off...6431932214.jpg

I don't know if the new boat has seadek brand or not, just know its waayyy more comfortable
https://cimg9.ibsrv.net/gimg/www.off...68cd27946.jpeg

To F2’s comment, that’s exactly what I was concerned with.

Cig also use the lonseal type of flooring, specifically the loncoin with the circles.... https://lonseal.com/applications/marine/ its like pirelli but not as hard on the feet, I used snapin carpet back in the day for mine, they did a great job.

So what do these flooring/carpet guys generally charge to make just a cockpit replacement? I don't want snap-in or glue down. My current factory carpet just lays in. I have a 1.inch building foam pad under it.

I think i still have a blue lay in for my 02 somewhere.

humm might match my boat.......:grinser010: