Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Information needed on 46 Rough Rider (https://www.offshoreonly.com/forums/cigarette/92895-information-needed-46-rough-rider.html)

GLH 12-22-2004 09:44 AM

Re: Information needed on 46 Rough Rider
 
My bad...

It was this ride. The pic of the boat on jacks made me think it was in Europe.

http://www.yachtworld.com/core/listi...75&slim=quick&

GLH 12-22-2004 09:51 AM

Re: Information needed on 46 Rough Rider
 
19,000 full of gas people and gear...That bad boy might be able to crush a few waves... :eek:

Jamie B. 12-22-2004 04:56 PM

Re: Information needed on 46 Rough Rider
 
Sweet ride. :cool:

Thats alot of weight for those Bravo's though.

Waterboy123 12-22-2004 08:12 PM

Re: Information needed on 46 Rough Rider
 
At 19,000lbs, I would hope that it would knock most things out of it's way!!

The boat is currently in East Asia, so from a shiping point of view it is much cheaper than from the east coast of the states.

I too agree that it would be right on the limit for Bravo's, I mean the motors alone will stress them somewhat without having to push near on 20k lbs of fibreglass

What are the options for upgrading drives? Do I have to go too something like a SM drive? I don't want to break it everytime out.

Jamie B. 12-22-2004 08:59 PM

Re: Information needed on 46 Rough Rider
 
Maybe look into those Konrad drives. If you could afford it though, the SSM#3A or 5 would be the way to go.

lucky strike 12-22-2004 10:14 PM

Re: Information needed on 46 Rough Rider
 

Originally Posted by Jamie B.
Maybe look into those Konrad drives. If you could afford it though, the SSM#3A or 5 would be the way to go.

I would just spend the little extra money on the SSM. Your putting in a tranny anyways and everyone knows what a Speedmaster drive is.

LS JR.

GLH 12-23-2004 05:53 AM

Re: Information needed on 46 Rough Rider
 
Trannis will be A LOT of work in that engine bay, all three engines pushed forward 10" maybe not the center one but you'll need a new drive-shaft..... Look at the pic generator and more than likely AC in front of each rear engine, mufflers extended....

SSM's or Konrads and trannies will rob to much out of those 525's and your taking $$$ for time, gimbal assemblies, drives , trannies, fiberglass....

Run the bravos and when they blow up put XR's in. First one goes put the XR in the middle, second bravo goes put the XR's port and starboard, third one your done!!! Get a little money back selling the blown Bravos and be careful taking off. Take it really easy taking off. Oh yes check your top cap torque as often as you can specially on the left turning prop.

Just my humble op.

Cigaretteman 12-23-2004 10:32 AM

Re: Information needed on 46 Rough Rider
 
120 K seems a bit high ! It was on e-bay 1 or 2 weeks ago with buy it for 75 K right now and no one bid on it.

GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf :D

Cigaretteman

lucky strike 12-23-2004 10:49 AM

Re: Information needed on 46 Rough Rider
 

Originally Posted by Cigaretteman
120 K seems a bit high ! It was on e-bay 1 or 2 weeks ago with buy it for 75 K right now and no one bid on it.

GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf :D

Cigaretteman

:D :D :D
Saw that boat in the intracostal one day getting a ticket for being up on plane in a no wake zone! GL, can you post the pic?

LS JR.

pm203 12-23-2004 12:09 PM

Re: Information needed on 46 Rough Rider
 
Dont know actual condition,but that boat should be some where around 100 ish.


All times are GMT -5. The time now is 05:46 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.