Information needed on 46 Rough Rider
#11
My bad...
It was this ride. The pic of the boat on jacks made me think it was in Europe.
http://www.yachtworld.com/core/listi...75&slim=quick&
It was this ride. The pic of the boat on jacks made me think it was in Europe.
http://www.yachtworld.com/core/listi...75&slim=quick&
#14
Thread Starter
Registered
Joined: Feb 2004
Posts: 450
Likes: 3
From: USA
At 19,000lbs, I would hope that it would knock most things out of it's way!!
The boat is currently in East Asia, so from a shiping point of view it is much cheaper than from the east coast of the states.
I too agree that it would be right on the limit for Bravo's, I mean the motors alone will stress them somewhat without having to push near on 20k lbs of fibreglass
What are the options for upgrading drives? Do I have to go too something like a SM drive? I don't want to break it everytime out.
The boat is currently in East Asia, so from a shiping point of view it is much cheaper than from the east coast of the states.
I too agree that it would be right on the limit for Bravo's, I mean the motors alone will stress them somewhat without having to push near on 20k lbs of fibreglass
What are the options for upgrading drives? Do I have to go too something like a SM drive? I don't want to break it everytime out.
#16
Originally Posted by Jamie B.
Maybe look into those Konrad drives. If you could afford it though, the SSM#3A or 5 would be the way to go.
LS JR.
#17
Trannis will be A LOT of work in that engine bay, all three engines pushed forward 10" maybe not the center one but you'll need a new drive-shaft..... Look at the pic generator and more than likely AC in front of each rear engine, mufflers extended....
SSM's or Konrads and trannies will rob to much out of those 525's and your taking $$$ for time, gimbal assemblies, drives , trannies, fiberglass....
Run the bravos and when they blow up put XR's in. First one goes put the XR in the middle, second bravo goes put the XR's port and starboard, third one your done!!! Get a little money back selling the blown Bravos and be careful taking off. Take it really easy taking off. Oh yes check your top cap torque as often as you can specially on the left turning prop.
Just my humble op.
SSM's or Konrads and trannies will rob to much out of those 525's and your taking $$$ for time, gimbal assemblies, drives , trannies, fiberglass....
Run the bravos and when they blow up put XR's in. First one goes put the XR in the middle, second bravo goes put the XR's port and starboard, third one your done!!! Get a little money back selling the blown Bravos and be careful taking off. Take it really easy taking off. Oh yes check your top cap torque as often as you can specially on the left turning prop.
Just my humble op.
#18
120 K seems a bit high ! It was on e-bay 1 or 2 weeks ago with buy it for 75 K right now and no one bid on it.
GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf
Cigaretteman
GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf
Cigaretteman
#19
Originally Posted by Cigaretteman
120 K seems a bit high ! It was on e-bay 1 or 2 weeks ago with buy it for 75 K right now and no one bid on it.
GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf
Cigaretteman
GL a 04 tiger just came up for sale in the classifieds in your colors how do you like that one ? Maby the painter was asked to use up all the left over colors on the shelf
Cigaretteman

Saw that boat in the intracostal one day getting a ticket for being up on plane in a no wake zone! GL, can you post the pic?
LS JR.



