Gladiator Speeds

Reply Subscribe

Thread Tools

01-02-2005 | 04:06 PM

#71

DirtyMoney

Registered

Joined: May 2003

Posts: 3,025

Likes: 29

From: Murrayville, GA

Re: Gladiator Speeds

Arneson conversion does not require relocate. Trans goes in box.

01-02-2005 | 04:18 PM

#72

delsol

Registered

Joined: Sep 2001

Posts: 1,542

Likes: 55

From: Kingsville----lake erie

Re: Gladiator Speeds

Sorry RBR --we're not referring to the conversion, I realize they go in a box. I'm questioning the staggered set-up

01-02-2005 | 07:50 PM

#73

2112

Registered

Joined: Dec 2003

Posts: 1,991

Likes: 13

From: Socialist Republic of Washington State

Re: Gladiator Speeds

Quote:

Originally Posted by rbr2328

Arneson conversion does not require relocate. Trans goes in box.

Has nothing to do with trannies and everything to do with the notched transom. The notch will not allow you to mount the drive in the correct location when the boat has staggered motors.

I checked with Arneson on this.

01-03-2005 | 12:25 AM

#74

delsol

Registered

Joined: Sep 2001

Posts: 1,542

Likes: 55

From: Kingsville----lake erie

Re: Gladiator Speeds

thanx for clarifying

01-03-2005 | 10:19 AM

#75

2112

Registered

Joined: Dec 2003

Posts: 1,991

Likes: 13

From: Socialist Republic of Washington State

Re: Gladiator Speeds

No problem.

My suggestion, if one wanted Arnesons in a Gladiator, is to keep the engines side by side with the trannies inside the boat. Plenty of room for this. With the trannies in the boat the CG should be close to the staggered set up. This also allows for proper drive positioning.