friend's Cafe project
#42
Originally Posted by stecz20
who is doing the work for him, and where...
Vincent Custom Paint at Lake of the Ozarks. www.vincentcustompaint.com
#46
PROPS - CAFE 35
I am running two stroked bulldogs (4.5 X 4.75 stroke) and Arizon Speed and Marine, Merlin heads etc, EFI - Motors where build by Gellner Marine and est. 615 HP -
National Marine lost my Props and gave me a set of 25 Mirages (RRRRRIGHT) so I looking for a good starting point to prop it - I do recall running 29's Mirage but not sure and hit 73 at 5250 RPM but I think the boat has more Grunt that that - Do you think 30 Bravos is too much prop?? anyone out there with a CAFE running similar HP (1.5 gearing) should I go with 28 Bravos ???? Help
GO
I am running two stroked bulldogs (4.5 X 4.75 stroke) and Arizon Speed and Marine, Merlin heads etc, EFI - Motors where build by Gellner Marine and est. 615 HP -
National Marine lost my Props and gave me a set of 25 Mirages (RRRRRIGHT) so I looking for a good starting point to prop it - I do recall running 29's Mirage but not sure and hit 73 at 5250 RPM but I think the boat has more Grunt that that - Do you think 30 Bravos is too much prop?? anyone out there with a CAFE running similar HP (1.5 gearing) should I go with 28 Bravos ???? Help
GO
#48
Registered
Joined: Nov 2003
Posts: 157
Likes: 0
From: gibarltar Mich.
I run a cafe with 540hp motors at about 73mph at 5200rpm throw old TRS drives on 24p four bladed hydromotive they seem to work the best for me. I run some 26p bravos four bladed and went slower and at little more RPM
#49
sweet paint work, where did the cig battery box covers come from? what does an exterior only paint job like that cost? that is the hottest lookin cafe i've ever seen, good job, ratman
#50
that is one awesome looking boat. Your friend has done that poor boat justice...i remember looking at it when before i bought mine...glad to see it being brought back to better than new!




