42 rev project update
03-10-2005 | 05:03 PM
#1
Thread Starter
Registered
Joined: Aug 2004
Posts: 1,560
Likes: 3
From: louisville, kentucky
42 rev project update
the revolution went for a test run this weekend but was cut short just after reaching 3000 rpms when we realized there was near 3 ft of water in teh bilge & the center engine was smoking. turns out the water hose going to the center engine came off and was filling up the bilge. The bilge pumps was sure pumping pretty fast. Next were going to paint...
Last edited by 375stinger; 03-10-2005 at 05:05 PM.
03-10-2005 | 06:59 PM
#3
Thread Starter
Registered
Joined: Aug 2004
Posts: 1,560
Likes: 3
From: louisville, kentucky
Re: 42 rev project update
it couldve been in sarasota before, but i bought it from someone in saint louis who had it sitting in his yard for several years, w/o engines & had been sunk before. its possible the boat couldve been in florida but not anytime prob within the last few years.
