Post your Oldschool ride!
#1631
Registered
Joined: Oct 2012
Posts: 464
Likes: 6
From: Grosse Pointe Woods, Mi
Scary, I grew up on the eas side, but have lived in howell for the past 7 years. Had to go to st clair shores for a meeting today and couldnt resist a ride down jefferson. I locked up the brakes when I saw the Mirage. It must be fate!
#1632
Registered

Joined: Jan 2007
Posts: 232
Likes: 7
From: Birmingham, MI
#1633
Registered

Joined: Dec 2006
Posts: 341
Likes: 12
From: Lake St. Clair
#1636
Registered

Joined: Jan 2007
Posts: 232
Likes: 7
From: Birmingham, MI
#1637
Registered

Joined: Jan 2007
Posts: 232
Likes: 7
From: Birmingham, MI
http://www.flpowerboat.com/gallery/d...bum=121&pos=29
The link above is the boat back when paul had it. The current owner has painted the boat all white with a small american flag triangle on the gunwale. I have his number if your interested pm me.
The link above is the boat back when paul had it. The current owner has painted the boat all white with a small american flag triangle on the gunwale. I have his number if your interested pm me.
Last edited by topprop; 10-03-2013 at 06:21 AM.
#1638
http://www.flpowerboat.com/gallery/d...bum=121&pos=38
The link above is the boat back when paul had it. The current owner has painted the boat all white with a small american flag triangle on the gunwale. I have his number if your interested pm me.
The link above is the boat back when paul had it. The current owner has painted the boat all white with a small american flag triangle on the gunwale. I have his number if your interested pm me.
#1639
Registered

Joined: Jan 2007
Posts: 232
Likes: 7
From: Birmingham, MI
Mark that is it. I was told that the motors Paul had in it were removed and replaced with something a little smaller. Paul had someone fabricate aluminum panels to cover / replace the glass in the windshield to create a fairing. He also replaced the chairs with two cigarette bolsters from a Cafe Racer I believe. The current owner told me it was the old 50/50 and it has both the fairing and the bolsters Paul had done....so I believe him.
http://www.flpowerboat.com/gallery/d...bum=121&pos=29
Last edited by topprop; 10-03-2013 at 06:18 AM.



