![]() |
Originally Posted by jjbm2001
(Post 4634131)
Hey guys, we have a 1988 regal velocity 454, we bought it brand new in 89, it's all original and we were wondering if anyone knew what carburetor it has
Cheers, Dave |
Here's my updated / old 31 Bullet with 500EFI'S
https://cimg6.ibsrv.net/gimg/www.off...821e5ddf43.jpg https://cimg8.ibsrv.net/gimg/www.off...884653bce3.jpg https://cimg9.ibsrv.net/gimg/www.off...b69a095030.jpg |
https://cimg5.ibsrv.net/gimg/www.off...eede88df95.jpg
1990 Century Ultra III I don't know anything about them, and can' find much. If anyone knows any history of these models I would appreciate a little info! Stepped hull twin 454's with blowers SSM3 Drives I peeled the pin stripes off the sides and it looks much better now, needs polishing bad! I've had to do a few small repairs, and the list is getting longer for the winter, but I like it |
Originally Posted by scippy
(Post 4634483)
Legend how does see run with the single power?.......what type (or make) fuel injection?? customization was tastefully done with no deck insert
and lifeline just smooth and flat, but Is that mad mother ??? Thought mad mother was a 1976??.....top of frame says it's a 1973 magnum sport. |
Originally Posted by legend
(Post 4637821)
Scippy, the engine is a Paul Pfaff 600 Challanger. It has the bored Arizona Speed and Marine manifold, intake and ECM, Dart Pro1 heads, Dressed in IMCO. Dyno 620 HP and 5800 RPM. Bravo1 up 2 inchs. In the low 80’s. Fuel in front of engine. Runs very light but a good time. The hull was raced in many transom configurations. Twin Volvo, Twin Trs, Twin Bravo, Cut for twin Alpha and now single Bravo. One of these steps lost the Vin. Years back they gave it a Vin tag and title of 76 but I’ve been told it’s a 73? |
Originally Posted by resurrected
(Post 4636453)
https://cimg5.ibsrv.net/gimg/www.off...eede88df95.jpg
1990 Century Ultra III I don't know anything about them, and can' find much. If anyone knows any history of these models I would appreciate a little info! Stepped hull twin 454's with blowers SSM3 Drives I peeled the pin stripes off the sides and it looks much better now, needs polishing bad! I've had to do a few small repairs, and the list is getting longer for the winter, but I like it Sharp looking boat! It must fly!! |
Thanks, its a little more "euro" look than I wanted but it's grown on me
Its not bad, I was able to get 77 out of it, with lots of tuning yet to do! |
1984 Magnum
well it was an old school but is currently going through some major changes :) https://cimg0.ibsrv.net/gimg/www.off...c9fdc4cbd.jpeg https://cimg8.ibsrv.net/gimg/www.off...d68191837.jpeg https://cimg9.ibsrv.net/gimg/www.off...e1c908064.jpeg https://cimg1.ibsrv.net/gimg/www.off...4ed3ec821.jpeg https://cimg3.ibsrv.net/gimg/www.off...2b02fbc6e.jpeg |
Here’s the build thread for anyone who wants to check it out https://www.offshoreonly.com/forums/...-imagined.html |
Old school racers we saw
https://cimg5.ibsrv.net/gimg/www.off...a1c913064.jpeg
https://cimg6.ibsrv.net/gimg/www.off...284381860.jpeg https://cimg7.ibsrv.net/gimg/www.off...3a4b537f4.jpeg https://cimg8.ibsrv.net/gimg/www.off...95e7626ef.jpeg https://cimg9.ibsrv.net/gimg/www.off...3d2a9623f.jpeg Our boat. Lake Mead https://cimg0.ibsrv.net/gimg/www.off...54d2caff5.jpeg |
| All times are GMT -5. The time now is 04:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.