Post your Oldschool ride!
08-25-2007 | 07:54 AM
#801
Registered
Joined: Oct 2003
Posts: 297
Likes: 0
From: Harrison twp. MI
Love to but can't get Thurs off...and we're doing a funrun on the 2nd........
love to check out the ride sometime....
08-25-2007 | 12:05 PM
#805
Registered
Joined: Jul 2006
Posts: 34
Likes: 0
From: blue grass, iowa
i have been restoring this boat for the past 4 years. I was going to change over to a bravo I from the alpha i have now this year but the crankshaft in my 350 broke and i had to build a new motor so i didnt have the money to update the drive this year. I built the motor i was going to run with the the bravo knowing the alpha wouldnt hold up long but i didnt think it would eat it up in 3 weekends. I was wrong.
08-25-2007 | 12:11 PM
#806
Registered
Joined: Jul 2006
Posts: 34
Likes: 0
From: blue grass, iowa
could someone point me in the right direction on how to set up the boat for the new power? what bravo drive can i get away with. standard / or xz , xr? I have been told a stock bravo should do just fine. Also i would like to know what x dimension for the best speed. What trim tabs should i use. Any help would be great.
08-25-2007 | 12:19 PM
#807
Registered
Joined: Jul 2006
Posts: 34
Likes: 0
From: blue grass, iowa
I have been on alot of the superboat forums reading up on their setups and i have a good idea of where to start but i have no idea if my 79 excalibur is an exact hull as the old supers or not. How much dose my hull weigh and how fast should it go with the right rigging?
08-25-2007 | 02:21 PM
#809
Driver-441
Joined: Aug 2004
Posts: 12,011
Likes: 1,511
From: Lake George
I have been on alot of the superboat forums reading up on their setups and i have a good idea of where to start but i have no idea if my 79 excalibur is an exact hull as the old supers or not. How much dose my hull weigh and how fast should it go with the right rigging?
08-25-2007 | 02:30 PM
#810
Gold Member
Joined: Mar 2003
Posts: 2,376
Likes: 94
From: Grosse ile michigan
