Post your Oldschool ride!
08-28-2007 | 09:50 PM
#841
Registered
Joined: Jul 2006
Posts: 34
Likes: 0
From: blue grass, iowa
You usually see tabs mounted as close to the center of the boat as you can (so they still contact the water well as the hull gets higher out of the water). Long performance k-planes are usually tappered to reduce drag, and are only angled heavily on the drive side on narrow hulls or twin drives to clear the drives as they turn.
PS we should have started a seperate thread on this......huh
PS we should have started a seperate thread on this......huh
08-29-2007 | 07:51 AM
#842
JC Performance Engines
Joined: Jul 2002
Posts: 8,904
Likes: 33
From: Long Island, NY
79ex, you can get smaller than the 280s.
I had them... see the link.
http://mercuryracing.com/products/ac...s/trimtabs.php
I had them... see the link.
http://mercuryracing.com/products/ac...s/trimtabs.php
08-30-2007 | 01:41 PM
#845
Registered
Joined: Nov 2003
Posts: 190
Likes: 2
From: Annapolis, Md
08-30-2007 | 04:41 PM
#846
Registered
Joined: Aug 2007
Posts: 414
Likes: 1
From: Overland Park, KS 87mm Loto
there is alot of custom fiber glass work done to the boat the engine cover is completly custom that was done before i bought it the transon is factory from what ive seen on a few other starbucks ive seen on the internet it has a dominator pump
Last edited by baditude; 08-30-2007 at 04:55 PM.
09-06-2007 | 09:40 AM
#847
Registered
Joined: Feb 2007
Posts: 79
Likes: 0
85 Formula 302 Sr-1
Here is my old school in a new school attitude[ATTACH]Attachment 297151[/ATTACH]
Last edited by don; 05-21-2009 at 08:42 PM.
