Hi Sean,

Thank you for the info. I'm going to HB on the 29th. I'm going to Vegas on the thursday till the monday, back on tues then to miami on the friday. :evilb:

I'm going to look around. If you are free we should catch up for a drink. I have been to SC performance, its around the corner from us (producer lane).

I'm going to see if I can extend my trip a little.

This boat is fantastic, but not sure still what i want. Again I appreciate the info

oh I forgot, mate, I havent forgotten to post all that stuff on classic offshore, but have been flat out at work, been on the gold coast, off to Dubai tomorrow, back in a week then off to USA. When I return I will scan it and put it on classic offshore

Brent

Brent, sounds good to me! My father flys back to NY on the 29th, so I should be around. I spend about half the week in my LA office and the other half in my Irvine office so it's not a hassle to be around. PM me or email and I'll give you my contact info. I'm always up for a cold beverage!

Later,

Sean

sorry it took so long to get back with you, ive been tied up making funeral arrangements etc.
the boat is in awsome condition zero rot any where, its a vinyl ester resin boat made with kevlar 49. it was stored indoors most of its life, i just stripped and refinished the engine compartment,the drives and tabs. the bottom is original pristine gelcoat, i stripped off the old paint job and blocked the sides of the boat twice to get it really straight. the hull sides and deck are in 3 coats of awlgrip epoxy primer ready for final sanding. i got a quote of 3500.00 to final sand and refinish the hull sides and deck. i have the awgrip paint to refinish the rest of the boat. it comes with just re upolstered bolsters and pads, a pair of 11plate bw72c trans, exhaust, a new 700 dollar offshore water pickup. and all fuel hoses and fitins to redo fuel system. just needs new power and its on!

Ratman:

Is the trailer included?

Wannabe

yyes it is its a triple torsion axle disc brake trailer. it has never been in the water. boat needs power and props and everything else is there.

Hi Ratman

What about the motors? I believe you have some for sale, can you please tell us about them? Also, the sterndrives, are they the ones in the pics? has any work been done to them?

the drives in the pic are the ones that come with the boat. they are ssm#3a with the 1.48 ratio. they are in great condition. i have a pair of 598 ci bbc blower motors. they are new with dyno time only. the make 1000+hp and 1050tq, they make 900+ft lbs of tq from 3000 to 6100 rpm. i have 80 in the motors and will take 50k. give me a call if you have any addl questions. the ebay reserve is set at 19k. phil 813-33-1442

Rat,

Are those the motors that Mark from Myrtle Beach built? If so, I've seen some of the stuff he's worked on and nothing but the best!!

You're taking a huge hit @ 50K!!

Thoughts & Prayers to you and your family. You've had a rough couple years. Hang in there man!!

Katz

yes those are the motors, i didnt cut any corners with nothing but the best parts. i have about 80k in the pair. they have dyno time only. im moving to costa rica and you cant get good gas and there are zero go fast boats down there, i'll probably buy a little cc boat with an eggbeater so i can do some fishing and partying

Today was the original drivers birthday.