Props.
06-19-2009 | 03:30 PM
#1
Thread Starter
Registered
Joined: Dec 2007
Posts: 2
Likes: 0
From: Sandefjord, Norway
Props.
Greetings!
Can anybody tell me what was the standard set up for a Scarab III with twin 330 HP Mercruiser 454 magnum's? I bought the boat with Quicksilver 14.5 x 3 x 23P Cleaver props. I'm not an expert, but this has to be wrong skrews. The drives are TRS's, the boat is a 1983 model and it's supposed to go 50 knots +. I can only get 42 knots on the GPS, and then the WOT rev's are 5200. It should be around 4800. So, any suggestions?
Can anybody tell me what was the standard set up for a Scarab III with twin 330 HP Mercruiser 454 magnum's? I bought the boat with Quicksilver 14.5 x 3 x 23P Cleaver props. I'm not an expert, but this has to be wrong skrews. The drives are TRS's, the boat is a 1983 model and it's supposed to go 50 knots +. I can only get 42 knots on the GPS, and then the WOT rev's are 5200. It should be around 4800. So, any suggestions?
06-19-2009 | 04:24 PM
#2
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Greetings!
Can anybody tell me what was the standard set up for a Scarab III with twin 330 HP Mercruiser 454 magnum's? I bought the boat with Quicksilver 14.5 x 3 x 23P Cleaver props. I'm not an expert, but this has to be wrong skrews. The drives are TRS's, the boat is a 1983 model and it's supposed to go 50 knots +. I can only get 42 knots on the GPS, and then the WOT rev's are 5200. It should be around 4800. So, any suggestions?
Can anybody tell me what was the standard set up for a Scarab III with twin 330 HP Mercruiser 454 magnum's? I bought the boat with Quicksilver 14.5 x 3 x 23P Cleaver props. I'm not an expert, but this has to be wrong skrews. The drives are TRS's, the boat is a 1983 model and it's supposed to go 50 knots +. I can only get 42 knots on the GPS, and then the WOT rev's are 5200. It should be around 4800. So, any suggestions?
5200 is to high,,but if u go with 4 blade or 24 pitch ,,i think they are going to be to big .
