|
Island performance rigged it..
thats Mario from LI??? |
Originally Posted by 818181
(Post 3571952)
.i'm pretty sure that was Bill Amidons boat called"Moly Black Gold" from New Hampshire,X- Raceboat.
Originally Posted by STV92
(Post 3571966)
8k boat + 3 motors ,
The parts on the motors are worth that. I have an awesomecat with 3 motors Set them low enough & they will run forever. If not you can buy a complete 2.5 block for under 4k Interesting :party-smiley-004: |
Originally Posted by 818181
(Post 3571952)
.i'm pretty sure that was Bill Amidons boat called"Moly Black Gold" from New Hampshire,X- Raceboat.
|
Interior is rough, but looks complete enough to make new covers.
2.4 not strong enough, but you could always sell them & buy 2.5 efi 200hp for a little more. They would fit on the mids. you have 3k in the lowers alone. Dont like the right side seating but still only 8k. If I did not already have one, I would be on this one. Heavy boats but were solid & great in rough water. Would run strong in the great lakes. Interesting buy & still does not look to bad. My 2 cents :kiss: |
Originally Posted by STV92
(Post 3572234)
Interior is rough, but looks complete enough to make new covers.
2.4 not strong enough, but you could always sell them & buy 2.5 efi 200hp for a little more. They would fit on the mids. you have 3k in the lowers alone. Dont like the right side seating but still only 8k. If I did not already have one, I would be on this one. Heavy boats but were solid & great in rough water. Would run strong in the great lakes. Interesting buy & still does not look to bad. My 2 cents :kiss: X1 as long as the boat is solid. Seems like it needs a GOOD cleaning, check motors and interior and trailer for who ever needs. Just the steering is close to what he's asking. |
I am sure someone will spend alot of money but for about 30K, it would be nice.
Not many with three motors. I just dont think they run well with the 2.4s, just not enough tork,hp. Change the 3 powerheads to 2.5 then it would run. 3l would be better but then you need to change mids, lowers wing plates etc, then price starts getting high. my 2cents Dont forget oil & fuel cost :lolhit: |
Originally Posted by STV92
(Post 3573063)
I am sure someone will spend alot of money but for about 30K, it would be nice.
Not many with three motors. I just dont think they run well with the 2.4s, just not enough tork,hp. Change the 3 powerheads to 2.5 then it would run. 3l would be better but then you need to change mids, lowers wing plates etc, then price starts getting high. my 2cents Dont forget oil & fuel cost :lolhit: |
First time I have seen seating on the right? not crazy about that.
Are they horn motors? Would love to see them without covers? Must be heavy, wonder what she weighs? Still would make more money on selling parts. If I had space for more boats, I would probably buy it. Like I need another project :angry-smiley-038: 75mph, not bad but with the 2.4, gas must be ouch! Mine with the efi promax, run great & great on gas. Still would sell the 2.4 & get 2.5efi. Been running the 2.5 promax, x3 for about 5 years and never had trouble with them. Only issue, watch the water pressure,,, again, my 2cents:party-smiley-004: |
2 300s itd be a nice boat
|
| All times are GMT -5. The time now is 06:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.