Dave, I think I have tubes, saddles but no clamps.

I will take the saddles lee thank you. I have the tubes and cables,the clamps I found on line last year some that look real close ....now what was that site????
MSG me I'll give you my number to work out details
Thank you..

I need a pilot bearing for the TRS trans that is in the back of the crank I can make one myself thought someone may have an old one sitting?

Check with Northbay marine. They are close to you. Good chance Dave has one.

Ok will do I think that is one I haven't checked yet
Love your boat katana what hull number is yours?

Dave,
I sent 3 pictures to your cell phone, let me know if they are what you are looking for.

Dave the bushing used for the Trs trans is the same as the one used for the input shaft of a Volvo 270 intermediate bearing. If you have a lath they are easy to make. The dimensions are 1".700 OD x .500 width,, the hole in the center for the Trs pilot shaft trans is .675 .... Here are a few pic's of the Volvo intermediate bearing that uses the same bushing.... I have one that's out that you can look at if need be. Mark

Thanks mark yes I have a lath at home I think I even have some stock close to what is needed just steel not brass

Kc.marine in Washington state. Ask for Kirk.

Great looking boat yourself. I will be painting this summer, similar to the Silver Streak, but with the name Seabiscuit. Want to make it look like a race boat.
hull # CDB290010276
Let me know if you have any info on it. Looks identicle to the brochure boat. Tall life line and only one I have seen without the grabrail on the windshield, love to find one with.

Are you keeping the old school exhaust?