p&d hulls....
04-23-2012 | 05:59 PM
#11
Registered
Joined: Dec 2006
Posts: 414
Likes: 2
Daaaaaaaamn, that 24 is sweet........never heard of anyone talk about the 24 magnum. If someone would have bet me that there is a 24 mag i would have lost my house! 
So altimatum switched the steering to the right side?
So altimatum switched the steering to the right side?
Last edited by bobo1; 04-23-2012 at 06:01 PM.
04-23-2012 | 08:56 PM
#12
Registered
Joined: Dec 2000
Posts: 6,283
Likes: 1
From: EASTON MA.
maybe charlie from Banana will post. I heard Don hated the 24 x7 hull after making the 24x8 hull. which he sold molds to Banana only. and used them for the cig 24x8. so Don let everyone have the 24x7. Charlie had a thread on it. here or over on the historic boat site. Artie
04-24-2012 | 09:14 AM
#13
JC Performance Engines
Joined: Jul 2002
Posts: 8,904
Likes: 33
From: Long Island, NY
ok guys, i guess i'm asking if each and every 24-7 came from a common mold or was each builder basically mimicking the original 24-7 design and producing their own molds/plugs to lay up the hull "in house"?
in other words, did pantera make a mold of a 24-7 and then lay the glass or did each of these builders buy the hulls from p&d and then "deck" them to suit?
thanks, rob
in other words, did pantera make a mold of a 24-7 and then lay the glass or did each of these builders buy the hulls from p&d and then "deck" them to suit?
thanks, rob
