flippin da bird
#1
Thread Starter
Registered
Joined: Aug 2010
Posts: 2,535
Likes: 1
From: MA
Just picked up a kinda cool old a$$ 1972 formula 233
It's surprisingly solid for being over the hill. The transom is like a rock and the stringers in the engine bay check out good too.
It has a mercruiser ford 302 coupled to a mercruiser drive. This must pre date Chevy coming along and knocking ford down a peg?
The floor has a couple squishy spots, deck has the same. I'm 200+ lbs and I jumped everywhere & didn't fall thru so imo its good enough for what it is.
Fired @ a tap of the key, ran smooth, pumps water good. On a trailer that to my shock made it home 40 miles .!
Brand new vhf radio & antenna, anchor , swim platform, new 60 gal tank, most gauges work.
Scored it for $300.
If somebody is lookin for a beater.....here it is.....
I'm going to buff the hull, get everything in order & see if I can turn a small profit.
If I can't sell it by spring ill resort to plan B....
I know there's some formula freaks that lurk so I won't say what plan B is.....but it rhymes with fart.....
The owner said this thing crushes 8 ft rollers & the motors tweaked.....it GPS @32 mph !!!!! LoL x2
I'll post some pix shortly
MD
It's surprisingly solid for being over the hill. The transom is like a rock and the stringers in the engine bay check out good too.
It has a mercruiser ford 302 coupled to a mercruiser drive. This must pre date Chevy coming along and knocking ford down a peg?
The floor has a couple squishy spots, deck has the same. I'm 200+ lbs and I jumped everywhere & didn't fall thru so imo its good enough for what it is.
Fired @ a tap of the key, ran smooth, pumps water good. On a trailer that to my shock made it home 40 miles .!
Brand new vhf radio & antenna, anchor , swim platform, new 60 gal tank, most gauges work.
Scored it for $300.
If somebody is lookin for a beater.....here it is.....
I'm going to buff the hull, get everything in order & see if I can turn a small profit.
If I can't sell it by spring ill resort to plan B....
I know there's some formula freaks that lurk so I won't say what plan B is.....but it rhymes with fart.....
The owner said this thing crushes 8 ft rollers & the motors tweaked.....it GPS @32 mph !!!!! LoL x2
I'll post some pix shortly
MD
#6
Thread Starter
Registered
Joined: Aug 2010
Posts: 2,535
Likes: 1
From: MA
I'm thinking its gotta be worth around a G right now?
The carb is off for a rebuild ( holley 2 brl )
Anything I do from this point on I'd like to get my T&M on it.
Plan to toss some plugs & filters in, def need to replace the bunks on the trailer. They are just 2x10 that keep the boat from moving side to side. The majority of the weight is on the keel center rollers. Pack & replace bearings as needed.
Then if I'm feeling up to it I might paint the hull sides. Not to put a whore in a Sunday dress, but I've been wanting to try the brightside paint....roll & tip. Figure this may be a perfect candidate !!
Anybody use this paint ? I'm guessing white will hide the most ?
The carb is off for a rebuild ( holley 2 brl )
Anything I do from this point on I'd like to get my T&M on it.
Plan to toss some plugs & filters in, def need to replace the bunks on the trailer. They are just 2x10 that keep the boat from moving side to side. The majority of the weight is on the keel center rollers. Pack & replace bearings as needed.
Then if I'm feeling up to it I might paint the hull sides. Not to put a whore in a Sunday dress, but I've been wanting to try the brightside paint....roll & tip. Figure this may be a perfect candidate !!
Anybody use this paint ? I'm guessing white will hide the most ?
#10
Registered
Joined: May 2012
Posts: 720
Likes: 0
From: Gibraltar, MI
I'm thinking its gotta be worth around a G right now?
The carb is off for a rebuild ( holley 2 brl )
Anything I do from this point on I'd like to get my T&M on it.
Plan to toss some plugs & filters in, def need to replace the bunks on the trailer. They are just 2x10 that keep the boat from moving side to side. The majority of the weight is on the keel center rollers. Pack & replace bearings as needed.
Then if I'm feeling up to it I might paint the hull sides. Not to put a whore in a Sunday dress, but I've been wanting to try the brightside paint....roll & tip. Figure this may be a perfect candidate !!
Anybody use this paint ? I'm guessing white will hide the most ?
The carb is off for a rebuild ( holley 2 brl )
Anything I do from this point on I'd like to get my T&M on it.
Plan to toss some plugs & filters in, def need to replace the bunks on the trailer. They are just 2x10 that keep the boat from moving side to side. The majority of the weight is on the keel center rollers. Pack & replace bearings as needed.
Then if I'm feeling up to it I might paint the hull sides. Not to put a whore in a Sunday dress, but I've been wanting to try the brightside paint....roll & tip. Figure this may be a perfect candidate !!
Anybody use this paint ? I'm guessing white will hide the most ?
I should post some pics of it, it's been sitting in his basement for almost 40 years, he was going to throw it out earlier this summer, but I rescued it







