Excalibur hawk 40 restore
#62
Thread Starter
Registered
Joined: Feb 2016
Posts: 56
Likes: 1
From: Pittsburg ks
Hey everyone I have been out of town working so not alot has happened with the boat. I did get my new rotating assembly for the 2nd motor. And the 1st motors is on the stand waiting to be installed after I do alittle more cleaning in the bilge. Just wanted to give a little update on progress.
#64
I thought i read earlier you were asking if wellcraft used kevlar...
correct me if I'm wrong but if you have an '82 Hawk '40 it should be
a Bill Farmer boat, because i have an '82 Hawk '40 and it's signed on the inside by all of people who made the boat which is Bill Farmer/Don Able and so on.
correct me if I'm wrong but if you have an '82 Hawk '40 it should be
a Bill Farmer boat, because i have an '82 Hawk '40 and it's signed on the inside by all of people who made the boat which is Bill Farmer/Don Able and so on.
#65
Registered
Joined: Jul 2007
Posts: 988
Likes: 2
From: San Diego
Excellent thread ! Its great to see another beauty being put back on the water. As for the TRS bellows, since she has been sitting for so long, it may be worth changing them out. I had one leak on a Scarab I owned and it also filled the transmission. Luckily i caught it before i ran it and no damaged was caused . Had to "pickle" the transmission with diesel then refill after the bellows change.
Last edited by DMOORE; 04-14-2016 at 09:54 PM. Reason: spelling





