Go Back  Offshoreonly.com > General Discussion > Classic Offshore
77 Scarab 300 Prop Selection >

77 Scarab 300 Prop Selection

Notices

77 Scarab 300 Prop Selection

Thread Tools
 
Old 07-20-2016 | 04:35 PM
  #11  
Registered
10 Year Member
 
Joined: Jul 2013
Posts: 76
Likes: 26
Default

Well back in the day I had '76 Scarab along with a good friend of mine. They both came stock with sbc and were called 280TRS. Stock came with 21" cleavers and my friends Scarab had a little work on it but still used the 21" and cupped them a little bit. Of course there were no Hydromotives or Mirage props back then. Since then I had a 9m Mirage SS and tried a half dozen props on it looking for best midrange and top speed and the mirage 3 blade props worked the best. The cleavers slipped a lot midrange but top speed was not too far off.
akattack is offline  
Reply
Old 07-20-2016 | 04:43 PM
  #12  
Thread Starter
Registered
 
Joined: Mar 2016
Posts: 331
Likes: 0
From: Stephenville
Default

Originally Posted by akattack
Well back in the day I had '76 Scarab along with a good friend of mine. They both came stock with sbc and were called 280TRS. Stock came with 21" cleavers and my friends Scarab had a little work on it but still used the 21" and cupped them a little bit. Of course there were no Hydromotives or Mirage props back then. Since then I had a 9m Mirage SS and tried a half dozen props on it looking for best midrange and top speed and the mirage 3 blade props worked the best. The cleavers slipped a lot midrange but top speed was not too far off.
Thanks for that, mines got the sbc in it, top speed with no trim control was 43mph
TruxtonFox is offline  
Reply
Old 07-20-2016 | 04:53 PM
  #13  
Registered
10 Year Member
 
Joined: Jul 2013
Posts: 76
Likes: 26
Default

Well something is wacked. The boat should run around 57/58 mph with clean hull, straight props, tuned up and trimmed out. If I remember right it was turning around 5200rpm. You'll get there, good luck and enjoy.
akattack is offline  
Reply
Old 07-20-2016 | 05:22 PM
  #14  
Thread Starter
Registered
 
Joined: Mar 2016
Posts: 331
Likes: 0
From: Stephenville
Default

Ya, I didn't have my trim pumps wired in, so that was full drag in the water, I'll get it all dialed in this weekend
TruxtonFox is offline  
Reply
Old 07-20-2016 | 05:56 PM
  #15  
Registered
 
Joined: May 2012
Posts: 1,465
Likes: 9
Default

I would think a 21 mirage plus would be close
Mr Maine is offline  
Reply
Old 07-20-2016 | 05:58 PM
  #16  
Registered
 
Joined: Oct 2012
Posts: 464
Likes: 6
From: Grosse Pointe Woods, Mi
Default

21p mirage will be the best prop for your boat with those motors. 23p will be the easiest to find used and will work but the rpms will be a little on the low side for optimum. More important is to get your trim working. you are pushing too much water for any props to make a worthwhile difference.
Katanna is offline  
Reply
Old 07-20-2016 | 06:29 PM
  #17  
Thread Starter
Registered
 
Joined: Mar 2016
Posts: 331
Likes: 0
From: Stephenville
Default

Agreed, pumps and cylinders are being rebuilt now and will go on, then hopefully I'll have a better idea on what it's doing/needing
TruxtonFox is offline  
Reply
Old 07-20-2016 | 11:21 PM
  #18  
Rookie's Avatar
Registered
20 Year Member
 
Joined: Jan 2003
Posts: 6,023
Likes: 1,522
From: Grand Rapids, MI
Default

As others stated a 21 Mirage would be the best choice for that hull. When I was looking for a Panther I looked at a beautiful 1976 300 with the 260 or 280 package. It ran out at 55mph with 21 cleavers. My TRS Panther is the same hull as yours and I've tried every style of prop out there. A 27 Mirage is the best prop I found. Stick with a plane Mirage.
Rookie is offline  
Reply
Old 08-08-2016 | 02:30 PM
  #19  
Registered
10 Year Member
 
Joined: Dec 2013
Posts: 119
Likes: 0
From: Wilmington, NC
Default

I've got a pair of 21p mirage props I bought for my 78 Scarab 300 with BBC's but they're too low for me to use so I need to sell them. I only got 55mph out of the boat with them and had plenty of throttle left, but with small blocks I bet they would be perfect
performancems is offline  
Reply
Old 08-08-2016 | 02:34 PM
  #20  
Thread Starter
Registered
 
Joined: Mar 2016
Posts: 331
Likes: 0
From: Stephenville
Default

I've got a set of mirage 21p labbed on there now and best i was getting was 53, I'm gonna try a set of 25's and see what they'll do after the performance parts go on.
TruxtonFox is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.