35' Mistress performance
11-21-2016 | 12:52 PM
#11
Registered
Joined: Apr 2015
Posts: 1,268
Likes: 68
I have an 86 Mistress. It had Hawk power originally when I got it (540s) made about 600 give or take, with transmissions and SSM3 drives. It would run 72. I freshened them to what I assume was about 700 and it would run 78 and I did get it to go 80 a couple times. I currently have 580s in with 10-71 blowers at 6psi and I believe it is probably making about 950, will run a tick over 90 all day in pretty much any condition
What drives you running
11-21-2016 | 04:07 PM
#12
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
11-21-2016 | 04:11 PM
#13
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
With 420's I saw 64 mph with 23 Mirage props at 5000 rpm, with 598 Hp I saw 73.7 @5500 rpm, current power was 73.5@5500.... working on more now as they did not perform properly..
TRS boat, with A/c usually half tank of fuel, trimmed to the moon, takes TONS of trim to see good speeds get that bow up... on MY indicators it goes fastest with drives around the 7-8 Mark
The Scarab don't compare in ride quality, you made the better choice..
TRS boat, with A/c usually half tank of fuel, trimmed to the moon, takes TONS of trim to see good speeds get that bow up... on MY indicators it goes fastest with drives around the 7-8 Mark
The Scarab don't compare in ride quality, you made the better choice..
11-21-2016 | 04:57 PM
#15
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
11-21-2016 | 05:07 PM
#16
Platinum Member
Joined: Jan 2007
Posts: 2,242
Likes: 264
From: Jackson, n.j. ~ Brooklyn, n.y.
11-21-2016 | 05:11 PM
#17
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Did you ever weigh it? Dyno sheets? That's awful fast for 660, but I think Kevlar ones are about 800-1000 lbs lighter so that's a good mph gain
11-21-2016 | 05:15 PM
#18
Platinum Member
Joined: Jan 2007
Posts: 2,242
Likes: 264
From: Jackson, n.j. ~ Brooklyn, n.y.
11-21-2016 | 05:17 PM
#19
Gold Member
Joined: Dec 2003
Posts: 3,498
Likes: 64
From: NewBaltimore Mi
Pete I finally saw Ralph yesterday, he is very happy with it's looks & performance. Ralph had a new engine hatch sun pad made for 5k so you know he must like that old school look....
11-21-2016 | 05:26 PM
#20
Platinum Member
Joined: Jan 2007
Posts: 2,242
Likes: 264
From: Jackson, n.j. ~ Brooklyn, n.y.
Tim here's a copy of the dyno sheet ..........the engines are running efi Arizona speed & marine..........SSM 3A's drives
