Intake manifold question
09-26-2025 | 10:46 AM
#1
Thread Starter
Registered
Joined: Nov 2016
Posts: 20
Likes: 2
Intake manifold question
I have an old 1985 sbc 383 stroker with an old rusty iron chevy intake 14096242. Can I get away with running an aluminum intake and if so which is the best one for marine use?
The boat will get flushed after every run.
The boat will get flushed after every run.
09-26-2025 | 11:01 AM
#2
Registered
Joined: Nov 2004
Posts: 14,154
Likes: 3,714
From: On A Dirt Floor
Those are great intakes. Inused to sell’m. Not available new anymore, but used ones are usually around. Make sure it’s not totted out like yours.
for searching use the following terms
14096242 Chevy Bowtie High Rise Cast Iron Intake Manifold p
for searching use the following terms
14096242 Chevy Bowtie High Rise Cast Iron Intake Manifold p
