Concept Hi Res Logo
#3
Registered
Joined: Dec 2009
Posts: 2,480
Likes: 2
From: Wyandotte, MI
I have sent them a few message requesting the Signature Scripted logo so I could make a new logo for my boat and never got a reply. I do have one (pictured below) that might be useful to you. I basically took a high res photo of the old logo on my boat then imported it into my software and made it a little bigger than cut it out using Lime Green and Sapphire Blue Vinyl. PM me your email address and I will send you what I have. Also if you can take a hi-res photo of the logo you want (it needs to be straight shot, not on angle), I can scan it into my software and cut the logo... (I have a vinyl cutter). I did ALL of the graphics on our Concept last Spring, including the Motors.
Last edited by low_psi; 04-28-2015 at 01:14 PM.



