Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Detailing, Painting, & Fiberglass (https://www.offshoreonly.com/forums/detailing-painting-fiberglass-167/)
-   -   rub rail (https://www.offshoreonly.com/forums/detailing-painting-fiberglass/119746-rub-rail.html)

Dono 01-05-2006 12:23 PM

rub rail
 
what can i expect to pay for a new rub rail for my powerplay 33 sport deck? Materials only, i think i can handle the labor part. Also, where can i buy this?
thanks
Don

Sean H 01-05-2006 01:25 PM

Re: rub rail
 
http://www.rubrails.com/

:D :D

US1 Fountain 01-05-2006 04:10 PM

Re: rub rail
 
West Marine carries TACO rubrails, the OE supplier for many brands of boats. The stores and online site carries only in short lenghts, but WM has a special order dept that can order lenghts up to I 'believe' 200' . I bought a 70' section of the insert from them last winter. You will pay a premium for a single peice though.

http://www.tacomarine.com/

Queenie 01-05-2006 04:12 PM

Re: rub rail
 

Originally Posted by Dono
what can i expect to pay for a new rub rail for my powerplay 33 sport deck? Materials only, i think i can handle the labor part. Also, where can i buy this?
thanks
Don

We purchased ours last winter through a local place and it was a little over $325 (aluminum 1 1/2") for 4 - 20' sections. We bought all new stainless screws and silicone so all in all, under $400.

Sean H 01-05-2006 05:44 PM

Re: rub rail
 

Originally Posted by US1 Fountain
West Marine carries TACO rubrails, the OE supplier for many brands of boats. The stores and online site carries only in short lenghts, but WM has a special order dept that can order lenghts up to I 'believe' 200' . I bought a 70' section of the insert from them last winter. You will pay a premium for a single peice though.

http://www.tacomarine.com/

that will only work with rubber/plastic rails won't it... stainless or aluminum comes in sticks from 12-20'...

US1 Fountain 01-05-2006 07:17 PM

Re: rub rail
 
I should have been more clear. I replaced only my insert with a single 1 peice which I only could buy through WM special order dept. Taco wouldn't sell to me directly. Didn't really look into the rubrail itself as I wasn't conscerned with that.

Dono 01-05-2006 07:59 PM

Re: rub rail
 
thanks for the info, mine is plastic so hopefully i should be able to get long sections.

Gmoney52 01-12-2006 10:40 PM

Re: rub rail
 
watch out fore through-bolting :mad:

Active Mike 01-20-2006 11:41 PM

Re: rub rail
 

Originally Posted by Gmoney52
watch out fore through-bolting :mad:

Isn't that the truth!!!!

wirebender 02-06-2006 03:53 AM

Re: rub rail
 
Just so happens that that is the same project that I,m doing. Taco discontinued the one I needed so I got it out of rubrails.com. . Mine is also vinyl and cost $20.00 per foot. I thought that it would be easier than it is. I suggest getting help from a friend.
Good luck.

Mark


All times are GMT -5. The time now is 05:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.