I am doing some work in the bilge and the guy doing the glass work said he can just gelcoat it all ? Should I do that or go the paint route ? m

Awlgrip works great in bilge ,expensive but dries hard cleans up well and last a long time.Gel coat works ok but you need to add wax for it to hardend or it will remain tacky for along time

Vinylester gelcoat or urethane paint only.regular gelcoat will absorb moisture.

I've used "EasyPoxy" from Pettit numerous times in the bilge area and it works perfectly, is very durable and best of all not very expensive.

I was worried about regular Gelcoat... I know it can be pourous ...

AWLGRIP is the Best!



Gerry

oh yeah it gets ya high as a kite too

Gerry where do I find AWLGRIP, I need to do my engine compartment as well.

Thanks
Jud

No gel. I can give you about 10,000 reasons. $$$

Its good stuff.
http://www.jamestowndistributors.com...=GRID&history=

If you are brushing make sure ya get the proper
acivator.

Gerry

You can't find the "old" Imron but AwlGrip is great! Gel is heavier, not as durable and doesn't shine as well!