Anybody interested in a boat mold?
05-06-2008 | 08:33 AM
#1
Thread Starter
Official OSO boat whore
Joined: Oct 2000
Posts: 6,157
Likes: 0
From: Mequon, WI
Anybody interested in a boat mold?
I bought this mold several years ago with the interest in pulling a hull from it, but it never happened. I'm going to loose my storage building so it has to go. It's for a 18'-6" cat with a set back outboard. There are a couple of steps to the sponsons and a pad in the back. The strakes are nice and sharp and the lines look straight. The mold is a good shape and the boat should sell well. It was stored outside for several years so it will need to be wet sanded, but I don't see any damage other than a couple of minor star cracks. I can help with shipping and can load. e-mail me direct or call me with your offer. einwaltert at yahoo.com 262-243-9663
05-06-2008 | 12:27 PM
#3
Registered
Joined: Nov 2003
Posts: 9,950
Likes: 0
From: 1 Flu Ovr KuKos Nest-WI
Last edited by Downtown42; 05-06-2008 at 12:33 PM.
05-06-2008 | 08:08 PM
#4
Thread Starter
Official OSO boat whore
Joined: Oct 2000
Posts: 6,157
Likes: 0
From: Mequon, WI
Oh, man does that bring back memories! Thanks for the link!
I tried to take some pics of the mold, but just couldn't get good ones. The bottom does have two steps in the outer sponsons and one large one on the center the sponson just before the pad.
I tried to take some pics of the mold, but just couldn't get good ones. The bottom does have two steps in the outer sponsons and one large one on the center the sponson just before the pad.
