Hull Reinforcement
08-06-2010 | 08:25 AM
#1
Thread Starter
Registered
Joined: Jul 2010
Posts: 48
Likes: 0
From: Rochester NY
Hull Reinforcement
I have a 1986 Chris Craft Scorpion that I am the process of restoring. I had a soft spot in the floor so I removed the seats, flooring, and everything in the v-berth to put new floors in (I couldn't stop myself once I got started). My question is now that I am this far should I put some hull reinforcements in it and how and where should I put them. I have a 454 around 500 hp and a bravo going back in it. Along with some exterior upgrades to update its look. Any advice would be greatly appreciated.
08-11-2010 | 09:13 PM
#3
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
its never a bad idea to have a bit more support thrown in there while your at it. The older CC Scorps tended to be a bit flexy and could use it. Do you have any pics of the progress so far?
would have got to this sooner but got side tracked
would have got to this sooner but got side tracked
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
