Offshoreonly.com - Vinyl Graphics

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Detailing, Painting, & Fiberglass (https://www.offshoreonly.com/forums/detailing-painting-fiberglass-167/)

- - Vinyl Graphics - help me decide... (https://www.offshoreonly.com/forums/detailing-painting-fiberglass/281030-vinyl-graphics-help-me-decide.html)

Quote:

Originally Posted by 92nsx (Post 3792982)

Yep, hard to have new graphics incorporated with the old gel on your force :(

Not sure where your located at or budget but graphics are running $1100. That includes custom design (in house) install and name on back to match new colors.

http://i212.photobucket.com/albums/c...0DVX/Baja3.jpg

I was working with Chris at Raceline Digital. They deal in vinyl graphics; not sure if he does any wraps. I am probably looking at about $500 for the graphics, but I will have to apply them myself or hire it out. Check out their website at RacelineDigital.com - they have a lot of very cool stock designs. Might give you some additional ideas for yours - although what you have already looks pretty nice.

The trouble with doing a wrap on mine is that you would have to go above the rub rail, and also on the deck. That would get quite expensive. Don't want to dump any more money into the old tub than I have to.

[ATTACH=CONFIG]519073[/ATTACH][ATTACH=CONFIG]519074[/ATTACH]

This shouldn't be too bad to apply... But...

You will need 2people, apply wet and enclosed (inside) as to no wind.

I redid my graphics by covering and extending my in gel graphics.

http://www.offshoreonly.com/forums/b...more-pink.html

Here's my thread.. Should finish up today and apply edge sealer then wax, etc.