Gel-Cote
06-01-2015 | 11:18 AM
#1
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
Gel-Cote
What is a good easy to use jel-cote to use.Do you have to spray over bare glass or can it be sprayed over a well sanded and cleaned area.Is a special gun needed???? Thanks JOHN SR
06-01-2015 | 12:34 PM
#2
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
it depends on what you are doing with it. You can spray over raw glass or prepped gel. If you are using a heavy build to do some fairing with it you should use a dump gun but if spraying a final finish you can get away with a Harbor Freight cheapy gun drilled out but you will need to cut the gel with Duratec. It really depends on what you are doing or trying to achieve . . . .
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
