Offshoreonly.com - Kiekaffer Trim Tab Template

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Kiekaffer Trim Tab Template (https://www.offshoreonly.com/forums/do-yourself-boating-budget/176370-kiekaffer-trim-tab-template.html)

27 MAGNUM

01-06-2008 08:02 PM

3 Attachment(s)

Its a lot work to bring the dead back to life, your complements sure help me stay the course. Thank you!

Enforcer2

01-09-2008 07:16 PM

Quote:

Originally Posted by MOBILEMERCMAN (Post 2390853)

Tony, mailman has it.

Thanks again, received them today. Very much appreciated:cool-smiley-011:

hurleyr

01-09-2008 08:53 PM

Quote:

Originally Posted by 27 MAGNUM (Post 2390846)

Here is the pic, it worked great for me all the studs went in like butter, every hole was at 90 and the template I made off the part was easy and the hole centers where money.

Thats a really slick idea. I couldn't visualize the description given earlier. I've made that mistake before drilling on one side and it comes out Arss crocked on the other. Fortunately it wasn't on the boat.

Enforcer2

02-20-2008 05:30 PM

2 Attachment(s)

MOBILEMERCMAN.........Thanks again for templates. Tabs are on..it was stilll pain in the azzzzz with the hydraulic tubes. Couldn't remove them without risk of damage. But I got em in.

Transom is 4" thick and of course tubes are 3". So I had to also get creative wuith the tubes , bolts and custom backing plates I made.

I can hardly wait to put the hydraulic lines on. I'm sure this will be fun

MOBILEMERCMAN

02-20-2008 06:00 PM

Nice, are you planning to run a ground wire to everything?

Enforcer2

02-20-2008 09:09 PM

No , I'm hoping lighting will strike and put me out of my misery!!:D

All times are GMT -5. The time now is 07:31 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page