Offshoreonly.com - 1471 Blower /distributor W/o Intercooler Spacing

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - 1471 Blower /distributor W/o Intercooler Spacing (https://www.offshoreonly.com/forums/do-yourself-boating-budget/179864-1471-blower-distributor-w-o-intercooler-spacing.html)

Quote:

Originally Posted by Dueclaws (Post 2452598)

That seems like a good solution, was there any change in fuel distribution (to the cylinders)?
You can easily work on the distributor too.
Did you have TBS turn the case around?
Thanks
Due

Yes, I just sent them to TBS, they disassembled them restripped, while they are apart, and reassembled with the rear plate and snout on the opposite end , just had to use short snout. In fact the pully almost touched the blower houseing. No change in fuel dist. probably because I was bolting right back onto the same intake just with an intake. And same MSD.:D

Quote:

Originally Posted by RunninHotRacing158 (Post 2451201)

Not alwayz Brad , i know guys taking off the intercoolers and runnin water /meth inj 20 lbs boost & runnin flawlessly ...:cool-smiley-011:

305 whipples @ 900hp will not need intercoolers while running in saltwater either .