1471 Blower /distributor W/o Intercooler Spacing
 

Does Anyone Know The Best Way To Set Up Igntion
Where There Is A Cost Effective Way To Do Away With The Short Deck Msd Distributor Which Does Not Clear Under 1471 Rear Offset Blower If A Intercooler Is Not Used ?

Howard

I might have to sell or trade them for 871-1071 's

Type, brand, hours, set up.

I have been looking for 1. Not sure about the offset.

post a pic, part number, etc.

PM me a price.

Jeff

MSD has a new distributor called the flat head, which is supposed to clear some blowers, but I don't know if that includes 14's. Check their web site: http://www.msdignition.com/2006/06-11.htm
If you want to trade your 14s, PM me. I have 2 TBS 8-71s and am looking for 2 14s.
Due

No the msd will not fit the low deck . I put them in the classifieds to see if someone might buy them for a good price then I might look for set up that clears my billet msd without a problem. How much would you be willing to pay me to trade per blower anyway?

That's the one I thought would fit when I bought the 1471's but it does not .

We have MSD crab cap distributors with BDS 1471 and BDS competition manifold - no intercooler w/ set back plate.

Fits like a champ.

Lloyd-
The BDS comp manifold might be taller than a TBS and you must use a a crank trigger with the crab you have, correct?

John

John,
You are correct, the BDS Comp manifold is taller. The plenum profile is also unique.

I believe the MSD 84697 will fit as long as you are using a set-back plate, since this adds to the height of the blower. If not, the crank trigger is not much more expensive. Has anyone formally asked MSD?

Lloyd-
We were wondering about the MSD 84891. It's a new distributor, which has the crab top and the pickup within the dist. housing.
I'm going to ask MSD later today and then report back.

John