throttel polish
04-07-2008 | 10:51 AM
#2
Registered
Joined: Mar 2007
Posts: 5
Likes: 0
From: sacramento, CA
Yes
See trim switch / Throttle control thread.
Mine was black. I stripped the paint with BIX stripper from Home Depot. The metal is a little rough when done. I cut the bulk of the metal with an angle air grinder and a scotch type disc, then sanded with 600 wet and finally polished it. It is stainless so it takes alot more time to polish verses aluminum. But it looks good when done.
See trim switch / Throttle control thread.
Mine was black. I stripped the paint with BIX stripper from Home Depot. The metal is a little rough when done. I cut the bulk of the metal with an angle air grinder and a scotch type disc, then sanded with 600 wet and finally polished it. It is stainless so it takes alot more time to polish verses aluminum. But it looks good when done.
Thread
Thread Starter
Forum
Replies
Last Post
cloudmaster_321
General Boating Discussion
5
07-03-2006 02:57 PM
